05-04-2008, 09:06 PM
|
#1 |
|
mustangjohn
|
03 Cobra block
I have the stock bare cast iron block out of my 03 Cobra for sale, im doing a rebuild and am going with a Teksid block. The block only has 30K on it, there are some VERY light scratches in a few of the cylinders but you can only see them you cant feel them. The block would only need a good hone job or at most a .010" over bore and pistons are easy to find for a .010" over block. I am including pics of the worst cylinder so you can see for your self. Im asking $300 obo for the block and local sale is perferable, i can even deliver it if its not too far.
__________________
Silver 03 Cobra Stage IV ported blower, TB and plenum 2.76 upper #4 lower pulleys, Mac o/r h pipe Flowmaster CB, Solid axle w/ 4.10 gears, Xcal2 11.03 @ 125.8 1.60 sixty Last edited by mustangjohn : 05-05-2008 at 08:24 AM. |
|
|
|
05-08-2008, 09:42 PM
|
#2 |
|
mustangjohn
|
ttt
__________________
Silver 03 Cobra Stage IV ported blower, TB and plenum 2.76 upper #4 lower pulleys, Mac o/r h pipe Flowmaster CB, Solid axle w/ 4.10 gears, Xcal2 11.03 @ 125.8 1.60 sixty |
|
|
|
|
05-09-2008, 01:50 PM
|
#3 |
|
mustangjohn
|
sold
__________________
Silver 03 Cobra Stage IV ported blower, TB and plenum 2.76 upper #4 lower pulleys, Mac o/r h pipe Flowmaster CB, Solid axle w/ 4.10 gears, Xcal2 11.03 @ 125.8 1.60 sixty |
|
|
|
Linear Mode
