Quote:
|
Originally Posted by 88StAnger
The engine is not an FMS engine, but was build by West Coast Mustangs and a like engine was dynoed in their test mule to produce the 340/340 using a cobra intake and aftermarket exhaust (cats still on the car though). The cam used is an FMS X303 cam 224/224 .542. The heads are milled Gt40P heads with a 10.5 compression ratio. 1.6 RR's were used. I am using a knockoff (professional products, I believe) of the Edelbrock Performer series intake manifold. My goal is to beat stock LS1 6-speeds on street tires.
|
good setup, i'll stick with my 12's guess on drag radials