Lone Star Stangs | The Texas Mustang Club - View Single Post

Allnuts · 06-22-2003, 01:41 PM

My g/f and I want to do a fuel injected to carb swap on her car. So far this what I have brainstormed:1) Rear- 8.8 complete w/ 3.55. 2)Suspension-Complete bushing kit,springs,struts & shocks,K-member,motors. 3)Cooling system- Electric fan from Mark VII, water pump, griffin rad, Hi temp hoses. 4)Exhaust- 1 3/4 long tube headers, X-pipe, Mac 3" exhaust system. 5)Tranny-Tremec 3550,shifter,driveshaft,bellhousing,clutch kit,quadrant kit, flywheel. 6)Induction- Carb,lower intake,throttle linkage, air cleaner. 7)Fuel System- 2 external fuel pumps,fuel lines, fuel regulator. 8)Motor-306 w/ AFR heads. 9)Ignition- Crane box,Ford racing wires, MSD coil, MSD dist. What Do Y'all think? Is there anything else I forgot?Does it sound good:2thumbup: or not:2thumbdwn ?

06-22-2003, 01:41 PM	#1
Allnuts LoneStarStangs Addict Join Date: Jun 2003 Location: San Antonio,Tx Posts: 704 Trader Rating: (-1)	2001 Mustang V6 going carb. My g/f and I want to do a fuel injected to carb swap on her car. So far this what I have brainstormed:1) Rear- 8.8 complete w/ 3.55. 2)Suspension-Complete bushing kit,springs,struts & shocks,K-member,motors. 3)Cooling system- Electric fan from Mark VII, water pump, griffin rad, Hi temp hoses. 4)Exhaust- 1 3/4 long tube headers, X-pipe, Mac 3" exhaust system. 5)Tranny-Tremec 3550,shifter,driveshaft,bellhousing,clutch kit,quadrant kit, flywheel. 6)Induction- Carb,lower intake,throttle linkage, air cleaner. 7)Fuel System- 2 external fuel pumps,fuel lines, fuel regulator. 8)Motor-306 w/ AFR heads. 9)Ignition- Crane box,Ford racing wires, MSD coil, MSD dist. What Do Y'all think? Is there anything else I forgot?Does it sound good:2thumbup: or not:2thumbdwn ?