Quote:
|
Originally Posted by 67stang347
Can any one tell me how to hook it up in a 67. I have alwayes use volt gages and my lab pup ate the instructions.
|
I'm working from memory here....from your voltage regulator, "B" side, run a heavy (8ga min in my opinion) to your guage. Then from the other post on the guage run it back to the "B" post. Remember A LOT of juice is going to the guage and it will get hot. Make sure you check it often.
Also I hope you have a 30, with a large face, guage instead of the 30-60 one. With the 30 you can actually see what's going on. The 30-60 is more of a general guage.
Again...from memory here....someone correct me if I'm wrong. I also would suggest picking up a good Haynes manual for your car if you haven't already done so.