Quote:
|
Originally Posted by machoman013
bbut depending where he lives...
|
*she* lol, this isn't my daily and the way things are heading I'll probably settle in North Dallas / Denton.
I applied the vinyl in pieces, since there's so much flatness on the back...I did the outer edges first, where the badges are, then the inner curves, those were the hardest parts...then the strips above and below the license plate. You have to make sure the surface is perfectly clean, and pull the badges and plate before you apply so you get a solid look. Also be sure you have a very sharp razor blade/model knife to cut the excess.