Lone Star Stangs | The Texas Mustang Club - View Single Post

chewie · 08-03-2006, 04:29 PM

pg 3

Once I finished being anal with all of the drilled holes, I needed to test fit and mark the 4 holes in the plates. Drill the holes, mount the plates, and finally I needed to use some touch up paint to cover up the welded areas/bare metal.

I plan to get some bushings to cut and mount over both of the nuts on the pins, which should finish this nicely.

So there you go. Now go get some hood pins and start drilling

08-03-2006, 04:29 PM	#3
chewie Making people happy, one stop at a time... Join Date: Feb 2005 Location: Behind you with the disco lights on... Posts: 1,235 Trader Rating: (0)	pg 3 Once I finished being anal with all of the drilled holes, I needed to test fit and mark the 4 holes in the plates. Drill the holes, mount the plates, and finally I needed to use some touch up paint to cover up the welded areas/bare metal. I plan to get some bushings to cut and mount over both of the nuts on the pins, which should finish this nicely. So there you go. Now go get some hood pins and start drilling Attached Thumbnails __________________ Nature should be allowed to do its job of killing off the weak, sickly, and ignorant people without interference from airbags and batting helmets