|
The starter has 3 bolts that hold it to the engine block. 1 on the bottom,(pic 60) 1 in the middle and 1on the top out of sight. To get to the top starter bolt you will need an extension (pic 61) the starter is not very big or heavy and once you take the last bolt out in will fall off. (pic 62) now with the starter out of the way you will have access to the motor mount NOTE: there are 6 bolts that hold the motor mount to the engine block, 2 of the 6 are extra long studs and require a deep socket to get them off. The other stud is out of sight and has the ground cable bolted to it.(pic 63)
Now go to the top of the motor from the hood side and unbolt the top motor mount bolt (64)
|