View Single Post
Old 04-30-2007, 05:18 PM   #5
FoxBodyNut
I don't want a LARGE Farva...
 
FoxBodyNut's Avatar
 
Join Date: Jan 2006
Location: NW SAtown
Posts: 337

Trader Rating: (1)
Send a message via AIM to FoxBodyNut
Quote:
Originally Posted by 86sleeper View Post
are you spraying out of the hole?
-no, that's spraying in the top end of first gear and all the rest. i got the car rolling, quickly bringing it up to WOT, but not like i was immediately flooring it. at about 4K, i hit the button in first. then kept the button down the entire run and let the WOT switch do its job in between shifts.

the one time i tried to slam it off the line, i broke traction hardcore.


Quote:
Originally Posted by smlopez383 View Post
that mph says you should be doin 11.70 range

do you have a 15" rim??? if so you can borrow some old et streets i have!!!
27.5" tall..i got down in the 1.5's with them behind a five speed so i think you shouldnt have a problem hookin up. lmk
sml
Thanks! I dont have any right now, but i know i need to pick some up. I run 5 lug now. I'll keep your offer in mind when i get some. the car weighed 3275 with me in it on friday, i figure with a good launch i might be hitting 11.6 or 11.5 who knows. its hard as hell to keep from breaking loose on 26" drag radials on a 17" rim with a 3.35 first gear and 3.90 rear end. goin to some 28" would both help me off the line and make my 4th a little longer up top, might be able to ride it out without hitting 5th gear. BTW, if you still want me to run those specs on a cam change, just send me a PM. i still have the stuff saved on the computer.

Last edited by FoxBodyNut; 04-30-2007 at 05:20 PM.
FoxBodyNut is offline   Reply With Quote