[ANRmotorsports]

Motor setup made 462RWHP and 454tq on a dyno jet all motor. Would like to sell the shortblock before pulling the motor apart for something small, so I will wait it out till then.... PM me if interested in any of these items and we will go from there, motor is out the car sitting in my shop.


SHORTBLOCK-3600.00 obo
-408ci 9.5:1 in a 79' mexican block .030 over w/ all ARP bolts.
-CHP rotating assymbly w/ dished probe pistons cut for a .650 lift, 4340 I-beam rods, and 4130 crank.
-Trickflow stage 3 cam TFS-51402002
-Crane double timing chain
-converted to hydraulic roller lifters(LINK BARS)
-Milodon 7qt pan and p/u
-Motorcraft hi flow oil pump (blueprinted)
-DSS main support girdle
- SFI balancer
Complete with machine shop build sheets balance-blueprint ect.... Roughly 5-8k miles on it, its a pump gas daily driver friendly motor, although its been parked most of its life. Oil PSI is at 60psi steadly.


HEADS-2000.00 obo
-AFR 205cc cnc heads machined with o-rings
-Crower springs/matching pushrods
-Crane gold series roller rockers 1.6's


INTAKE 351W-500.00 ear has been welded nicely back on and we guarantee it 100%.
-Trickflow R Upper (black)
-Trickflow lower

MSD 351w EFI BILLET DISTRIBUTOR-200.00

TFS BLACK VALVE COVERS-90.00 w/breathers

-BBK 90mm TB-225.00

-Meziere (blue) electric water pump-220.00


Drivetrain: 2300.00 obo
-TKO 600 transmission
-Tremec aluminum bell housing
-HPM crossmember
-Clutchmasters Billet flywheel 28oz
-Centerforce D/F 26 spline clutch
-31spline yoke

Exhaust: 351W 650.00
-Kooks LT w/ 17/8" primarys to 3" collector ((slip in style(ceramic coating needs to be redone))
-Kooks X-pipe
-Dynomax ultraflows dumped before the axle all welded

-42lb. matched injectors-250.00
Pro-M for 42's-225.00

-PA 130amp alternator (freshly rebuilt)-120.00

[ANRmotorsports]

Bump for a nice little motor.

[thunderchicken]

Yes sir...BUMP