Quote:
Originally Posted by steve5575
I think something is binding. Once its starts going up it goes at a normal speed then about 12" up it slows down to a very slow crawl. If something is binding what would it be, how would I adjust it and what would have caused it?
Thanks a lot guys. Keep it coming.
|
You'd have to pull the rear side panels to "watch" it in action to verify. You can always try a little lubrication at the bend points and see if it helps, buy a can of white lithium grease (works best and lasts longer then WD-40).
Worth a shot and will only cost you your time and a can of lube. 
__________________
Built 00 Windsor engine, .20 over, 11.6:1cr, fully ported heads, Hardballer intake w/cooling mod, Scat rods, Probe pistons, Cobra crank, tri-metal Clevite race bearings, VT Stage 2 N/A cams, adjustable cam gears, Canton windage tray, MMR oil pump, Cobra pick up, 75MM Accufab t-body, Dragon plenum, JLT CAI, 24# injectors, Bassani mid lengths, mufflers & O/R X,255lph fuel pump, BBK FPR, Fidanza aluminum flywheel, AJE K-member, ARP hardware everywhere, X-Cal SCT custom tuned, 3.73's, Pro 5.0, polygraphite motor mounts, over 300+ RWHP & 320+ TQ
|