Quote:
Originally Posted by RaceRat
Actually, it's pullied for 24psi with the 3.5 upper/6lb lower combo and it's not realistic to loose 10psi of boost.
The horsepower numbers are about where they should be...boost is not.
I'm running the exact same pulley combo on the same blower with fully ported heads, cams and lt's...I see 19-20 psi.
|
24? holy crap. Yeah, that is not losing 10 pounds. so everything on his setup is correct, except for possibly a malfunctioning boost guage.
I know the typical loss for heavily ported heads and a stroker will be about 4-6
just a 302 with AFRs and an s trim pullied for 10 psi will put down 430 rwhp at 6 psi almost any day of the week, of course e7s flow like a cofee straw