[MustangGTRound2]

I dont know much about the tranny so i took a Stage 1 Spec clutch with the Steeda Adjuster cable with the Quad and firewall adjuster to a local shop and asked them to install. They installed it but didnt do the firewall adjuster because the instructions said to CUT off a part of the cable which inserted into the firewall. they wanted to talk to steeda before making a mistake so i agreed. They tried adjusting as far as they could without the firewall adj and the clutch still only ingages very high to the point of almost stalling trying to accel from zero. Took the car back once i called steeda and they said it should still be able to adjuster properly without the firewall adjuster and that they should try using the diff hook on the quad. I took the car back and they did that and then installed the firewall adj. They got the adjustment around the middle of the pedel and it felt good but after driving it home it went BACK to the top of the pedel. It didnt stay where we had it so what is wrong lol? i havent talked to the shop about it cause they seem like they dont like messing with aftermarket and i know i have heard of this problem before so i figured i would see what somone here might have to say before i go forward with trying to find a solution.