Quote:
Originally Posted by mustangmelish
the parts should work together. everything was brand new. theres no reason that they shouldnt work together. thats why its the work. i had the new pushrods/springs/retainers for the cams. the heads and intakes were both stage 2 from the same place, lethal got the rest of the things (gaskets/bolts/etc) they called me saying that one of the heads might leak but once they got it on and everything then they said it was fine. when they said it might leak i asked if we should go ahead with the install and they said ya because they dont know if it will leak until we start up the car (but when we started it and tuned it and everything they said it wasnt leaking) so they did advise me on that, but they said it should be (and finally that it is) fine and i got the parts brand new but ive still been having problems since this install.
|
That is a lie!!!! When you brought the parts, you said they were new...I told you that they looked used to me and you acted like you didn't care and you told me to go ahead with the install. As far as the head being messed up, I told you I wouldn't install it because it was used and the surface area was damaged...you told me to go ahead install and you asked me whats the worst case...and I told you that it could leak but we won't know until its installed and you told me to go ahead and install it and we would deal with it if it leaked. But the head isn't leaking....but the point is you told me to do it and I recommended not to and you're on here saying its the other way around.