Quote:
Originally Posted by Aerocoupe
Don't know where you heard that crap. I had all the brakes and ABS from a 96 car and use the 97 Cobra wheels...looks and fits great! I used the axles and all from the rear of the 96 into the rear end on my 93 Coupe and swapped over the spindles out on the front. I would suggest you replace your Fox ball joints and use a set from a 95 GT as you won't have to mess with the 0.330" stack of washers between the castle nut and the spindle to get it to bolt down right. The SN-95 ball joint fits in the Fox LCA just like the Fox ball joint. One other suggestion is CC plates if you do not have them as you will need them. I would also suggest a bump steer kit as you will need it as well.
I just did this again on the front of the car as the MM K-member and the MM LCA's were dropped as well. The LCA's already have the SN-95 style ball joints in them and it made the bolt up super easy.
Darren
|
you have alot of information you must have a big ass brain.thanks alot though also did you have any issues with center caps thanks again