Lone Star Stangs | The Texas Mustang Club - View Single Post

mustangjohn · 05-04-2008, 09:06 PM

I have the stock bare cast iron block out of my 03 Cobra for sale, im doing a rebuild and am going with a Teksid block. The block only has 30K on it, there are some VERY light scratches in a few of the cylinders but you can only see them you cant feel them. The block would only need a good hone job or at most a .010" over bore and pistons are easy to find for a .010" over block. I am including pics of the worst cylinder so you can see for your self. Im asking $300 obo for the block and local sale is perferable, i can even deliver it if its not too far.

05-04-2008, 09:06 PM	#1
mustangjohn mustangjohn Join Date: Mar 2007 Location: San Antonio,TX Posts: 51 Trader Rating: (1)	03 Cobra block I have the stock bare cast iron block out of my 03 Cobra for sale, im doing a rebuild and am going with a Teksid block. The block only has 30K on it, there are some VERY light scratches in a few of the cylinders but you can only see them you cant feel them. The block would only need a good hone job or at most a .010" over bore and pistons are easy to find for a .010" over block. I am including pics of the worst cylinder so you can see for your self. Im asking $300 obo for the block and local sale is perferable, i can even deliver it if its not too far. Attached Thumbnails __________________ Silver 03 Cobra Stage IV ported blower, TB and plenum 2.76 upper #4 lower pulleys, Mac o/r h pipe Flowmaster CB, Solid axle w/ 4.10 gears, Xcal2 11.03 @ 125.8 1.60 sixty Last edited by mustangjohn; 05-05-2008 at 08:24 AM.