Lone Star Stangs | The Texas Mustang Club - View Single Post

seco · 05-14-2008, 09:09 AM

96greengt and Aguilarf were right on the money. Yanked out coil on plug COP
for cylinder 5 yesterday after work. I measured 0.5 ohms resistance between primary terminals (as it should) then measured 8.89K ohm resistance between the secondary terminals (manual shows it should read around 5.5K ohms).
So I bought a new COP and installed it ...... cleared code P0305 and stang
now runs top notch again! hells yeah ..... thanks

05-14-2008, 09:09 AM	#9
seco 4 valve FTW Join Date: Apr 2005 Location: TEXAS Posts: 892 Trader Rating: (0)	96greengt and Aguilarf were right on the money. Yanked out coil on plug COP for cylinder 5 yesterday after work. I measured 0.5 ohms resistance between primary terminals (as it should) then measured 8.89K ohm resistance between the secondary terminals (manual shows it should read around 5.5K ohms). So I bought a new COP and installed it ...... cleared code P0305 and stang now runs top notch again! hells yeah ..... thanks __________________ SLP loud mouth cat-back, Pro 5.0 short throw, 4.30 gears, Steeda sport springs, chrome 18x9 18x10 Saleens, NT555's 285/40/18 rear, and an O/R X and RAM clutch soon to come.....