|
Its a pretty mild cam and will peter out about 5200-5600 rpms with good springs . Power wise , it really depends on what you have and can make within that rpm range . I'd say 350 flywheel hp N/A tops with a good set of heads and intake on a 302.
The FMS letter cams were the shit 15 years ago . Now days there are many better choices but they cost a little more . I know BHAM on here claims to have ran high 12's on a bone stock 302 with a custom flat tappet cam . I would think a cam similiar in a hydraulic roller grind should run even better .
Last edited by thesource; 05-22-2008 at 09:37 AM.
|