Amp gage

67stang347 · 11-28-2005, 07:24 AM

Can any one tell me how to hook it up in a 67. I have alwayes use volt gages and my lab pup ate the instructions.

chewie · 11-28-2005, 08:42 AM

Quote:

Originally Posted by 67stang347

Can any one tell me how to hook it up in a 67. I have alwayes use volt gages and my lab pup ate the instructions.

I'm working from memory here....from your voltage regulator, "B" side, run a heavy (8ga min in my opinion) to your guage. Then from the other post on the guage run it back to the "B" post. Remember A LOT of juice is going to the guage and it will get hot. Make sure you check it often.

Also I hope you have a 30, with a large face, guage instead of the 30-60 one. With the 30 you can actually see what's going on. The 30-60 is more of a general guage.

Again...from memory here....someone correct me if I'm wrong. I also would suggest picking up a good Haynes manual for your car if you haven't already done so.

chewie · 11-28-2005, 08:50 AM

Oh I forgot, you could also wait at your puppies rear for the recycled instructions

67stang347 · 11-28-2005, 09:28 AM

Thanks for the info

**bighoss88lx** · 11-29-2005, 08:15 PM

Moved to classic tech...

11-28-2005, 07:24 AM	#1
67stang347 Registered User Join Date: May 2005 Location: Floresville,TX Posts: 51 Trader Rating: (0)	Amp gage Can any one tell me how to hook it up in a 67. I have alwayes use volt gages and my lab pup ate the instructions.

11-28-2005, 08:50 AM	#3
chewie Making people happy, one stop at a time... Join Date: Feb 2005 Location: Behind you with the disco lights on... Posts: 1,235 Trader Rating: (0)	Oh I forgot, you could also wait at your puppies rear for the recycled instructions __________________ Nature should be allowed to do its job of killing off the weak, sickly, and ignorant people without interference from airbags and batting helmets

11-29-2005, 08:15 PM	#5
bighoss88lx Killing is my Business...And Business is Good! Join Date: Aug 2003 Location: Elmendorf, Tejas Posts: 5,948 Trader Rating: (1)	Moved to classic tech... __________________ 1988 Mustang LX

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

11-28-2005, 09:28 AM	#4
67stang347 Registered User Join Date: May 2005 Location: Floresville,TX Posts: 51 Trader Rating: (0)	Thanks for the info