Anyone willing to help?

BlueThunder · 05-05-2005, 05:21 PM

Hi I was wondering if anyone here knew how to and would be willing to help me install some heads and/or cams sometime late this summer or early in August. If no one will help than i will have to get them professionally installed lots of $$$

so if anyone will be willing to help please LMK. I'm not a good mechanic and cannot do this by myself or instruct someone to do it. Thanks. Everyone who helps gets a free lunch and beer.

grey_area · 05-05-2005, 05:45 PM

If I lived i San Antonio and was not car stupid, I would help.

I am sure you will find someone to help! :jeff:

mustangt93 · 05-06-2005, 01:52 PM

what kind of heads are you planning on doing? where do you plan on doing all this, if you have everything ready by the time to do it i would be willing to lend a hand

BlueThunder · 05-06-2005, 04:20 PM

I don't have a shop or tools but i am going to rent out space at a local auto shop unless anyone has the tools or a shop to do it in. They will be Steen racing heads or VT racing heads. Are patriot performance heads any good? I've heard they have agood price but are theey bad heads?!? If they are quality heads i may go with them because of the good price.

blown98gt · 05-06-2005, 11:43 PM

Quote:

Originally Posted by BlueThunder

I don't have a shop or tools but i am going to rent out space at a local auto shop unless anyone has the tools or a shop to do it in. They will be Steen racing heads or VT racing heads. Are patriot performance heads any good? I've heard they have agood price but are theey bad heads?!? If they are quality heads i may go with them because of the good price.

patriot performance has screwed too many people so i would stay away. VT Engines is a good choice, but if i were you i would contact Tim at modular powerhouse performance in atlanta. i installed a set of his heads on a fellow LSS'ers car and man they were sweet. a good set of VT cams and you will have a fast ride. i will be in florida by the end of the summer but when you get ready and if you dont have someone to help that knows what they are doing LMK as i can easily walk you thru it over IM...good luck. there are a few guys on here that can do this job. you may want to offer a bit of cash to make it worth it...

BlueThunder · 05-08-2005, 10:53 AM

Ok anyone who helps gets some cash ya'll lemme know what's fair and i'll pay ya for yer trouble. Thanks although i just found out it may be a little longer than i expected until i'm ready to do this thanks anyways and i'll let you know down the road when i need the help.

05-05-2005, 05:21 PM	#1
BlueThunder Registered User Join Date: Feb 2005 Location: Wimberley, TX (Near Austin/San Marcos) Posts: 130 Trader Rating: (0)	Anyone willing to help? Hi I was wondering if anyone here knew how to and would be willing to help me install some heads and/or cams sometime late this summer or early in August. If no one will help than i will have to get them professionally installed lots of $$$ so if anyone will be willing to help please LMK. I'm not a good mechanic and cannot do this by myself or instruct someone to do it. Thanks. Everyone who helps gets a free lunch and beer.

05-05-2005, 05:45 PM	#2
grey_area Papa J. Squeeze Join Date: Oct 2003 Location: Friendswood,TX Posts: 3,056 Trader Rating: (0)	If I lived i San Antonio and was not car stupid, I would help. I am sure you will find someone to help! :jeff: __________________ LETS GET THIS PARTY STARTED Some people are like Slinkies ... Not really good for anything, But they still bring a smile to your face when you push them down a flight of stairs .

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

05-06-2005, 01:52 PM	#3
mustangt93 Resident Pretty Boy Join Date: Mar 2004 Location: San Marcos Posts: 258 Trader Rating: (0)	what kind of heads are you planning on doing? where do you plan on doing all this, if you have everything ready by the time to do it i would be willing to lend a hand

05-06-2005, 04:20 PM	#4
BlueThunder Registered User Join Date: Feb 2005 Location: Wimberley, TX (Near Austin/San Marcos) Posts: 130 Trader Rating: (0)	I don't have a shop or tools but i am going to rent out space at a local auto shop unless anyone has the tools or a shop to do it in. They will be Steen racing heads or VT racing heads. Are patriot performance heads any good? I've heard they have agood price but are theey bad heads?!? If they are quality heads i may go with them because of the good price.

05-08-2005, 10:53 AM	#6
BlueThunder Registered User Join Date: Feb 2005 Location: Wimberley, TX (Near Austin/San Marcos) Posts: 130 Trader Rating: (0)	Ok anyone who helps gets some cash ya'll lemme know what's fair and i'll pay ya for yer trouble. Thanks although i just found out it may be a little longer than i expected until i'm ready to do this thanks anyways and i'll let you know down the road when i need the help.