|
|
#21 | |
|
ka-chow!
|
Quote:
tim... what tranny do you have. typically 5spd guys go with 3.73's due to their very short first gear and the automatics go for 4.10's. i have 4.10's in my 5spd and it's definitely enough gear for the car. now that there is a 3.8 forum, you can ask q's and i won't dog on ya quite as much, but you'd still be better served from going to a specialty site instead of this one. ![]()
__________________
littleblackcoupe (9:24:18 PM): I could have brought my coupe out......... littleblackcoupe (9:26:58 PM): just ask tim if it is fast.......... tire26 (9:27:11 PM): why? in case i cared? :-) littleblackcoupe (9:27:34 PM): I doubt you do........ littleblackcoupe (9:27:44 PM): I could give your cousin a ride.......... littleblackcoupe (9:27:50 PM): :-P tire26 (9:28:02 PM): what, a ride that is really fast and over in a couple minutes? littleblackcoupe (9:28:03 PM): lmao littleblackcoupe (9:28:20 PM): that may be you tire26 (9:28:21 PM): jerky, loud, and scary? littleblackcoupe (9:28:28 PM): 2 pump chump........ |
|
|
|
|
|
#22 | |
|
"The Hitman"
|
Quote:
Yes i do have gears and have for sometime, And I'm not refering to switching to 4.10's...If he went to 3.55 or 3.73 he would get better gas milage...It takes less for his V6 to get the car moving...It would only be bad for his gas milage if he runs with his RPM's up high, but that is what 5th gear is for... P.S. I do have 4.10's...I do drive my car to the Fun Ford Events that I compete in.. Last one was 1200 miles away..and I do have over 120 passes on my car..So I got the pratice.. :woot:
__________________
Racing in a honda is a lot like the Special Olympics Even if you win, you're still retarded |
|
|
|
|
|
#25 |
|
Hates Liberal Scum
|
I have an automatic and anyone know what gears i have stock?and i know 4.10's will kill my gas milage especially with my driving style(flooring at every stop sign and green light)
![]()
__________________
<><'97 Rio Red Cobra #2637 of 6961 Modded-274.47RWHP/271.40 RWTQ<>< ![]() http://www.lonestarstangs.com/forum/auto-detailing-services-40031.html |
|
|
|
|
#26 | |
|
technology > displacement
|
Quote:
__________________
My Garage |
|
|
|
|
|
#27 | |
|
Hates Liberal Scum
|
Quote:
__________________
<><'97 Rio Red Cobra #2637 of 6961 Modded-274.47RWHP/271.40 RWTQ<>< ![]() http://www.lonestarstangs.com/forum/auto-detailing-services-40031.html |
|
|
|
|
|
#30 | |
|
Hates Liberal Scum
|
Quote:
__________________
<><'97 Rio Red Cobra #2637 of 6961 Modded-274.47RWHP/271.40 RWTQ<>< ![]() http://www.lonestarstangs.com/forum/auto-detailing-services-40031.html |
|
|
|
|
|
#31 |
|
:-l
|
best bet would be to go with gears instead of forced induction, only because you have little knowledge, i can't say much because i have little knowledge myself, but am slowing learning a thing or two about forced induction. On what type of gears, after driving a car with 4.10 gears i would go with 3.73 only because driving down the road at 65, 70 mph, the car was running at about 3 grand (4.10 gears). I have heard good things about 3.73 gears and i'm planning on putting some in my car later this week.
|
|
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|