Where can i get a 5/8 Nut from the exhaust for an 06 GT? one came off and my pipes from the mid back are kinda swinging around lol This may be a stupid question lol. Autozone didnt have anything that big, should i go to the dealer??
 |
|
Where can i get a 5/8 Nut from the exhaust for an 06 GT? one came off and my pipes from the mid back are kinda swinging around lol This may be a stupid question lol. Autozone didnt have anything that big, should i go to the dealer??
C&L Cold air, Functional Ram Air Hood, Hurst Short Throw, MAC Offroad Prochamber, Stainless Works Axle Back.
Just take the other nut off if you have another vehicle available and take it to the parts store to match it up. I don't see why you couldn't find one. If you need help tomorrow, let me know.Originally Posted by drewskie68
02 Mustang GT, 2??rwhp/3??rwtq on 87 CMR Tune, Roush short throw rally style shifter, King Cobra Clutch, C&L 85mm CAI/Plenum, BBK/Roush 75mm T/B, Steeda U/D's, Kooks L/Ts w/catted X, Bassani Cat-back, Eibach Pro-kit Springs, Energy Suspension bushings, KYB AGX's, Hotchkis C/C plates, Steeda "Custom" Bump Steer, UPR ProStreet rear control arms, Brembo/Hawk, BFG's, Mach 1 Shaker, Dual Halo Projector 8k HIDs, Kenwood: KDC-X790, KAC-9102D, KAC-8402; Infinity: 6810CS, 6812CF; Orion XTRPro series subs
My car http://www.cardomain.com/ride/2628572
My truck http://www.cardomain.com/ride/2206751
What parts store? autozone didnt have anything, should i go to say oreileys or advance??
C&L Cold air, Functional Ram Air Hood, Hurst Short Throw, MAC Offroad Prochamber, Stainless Works Axle Back.
Yes, those stores are always better IMO. I save autozone for last resort. I'd help you out tonight if I didn't already have plans, but I'm about to head out to a concert.
02 Mustang GT, 2??rwhp/3??rwtq on 87 CMR Tune, Roush short throw rally style shifter, King Cobra Clutch, C&L 85mm CAI/Plenum, BBK/Roush 75mm T/B, Steeda U/D's, Kooks L/Ts w/catted X, Bassani Cat-back, Eibach Pro-kit Springs, Energy Suspension bushings, KYB AGX's, Hotchkis C/C plates, Steeda "Custom" Bump Steer, UPR ProStreet rear control arms, Brembo/Hawk, BFG's, Mach 1 Shaker, Dual Halo Projector 8k HIDs, Kenwood: KDC-X790, KAC-9102D, KAC-8402; Infinity: 6810CS, 6812CF; Orion XTRPro series subs
My car http://www.cardomain.com/ride/2628572
My truck http://www.cardomain.com/ride/2206751
no worries... autozone was on the way lol ill try em in the morning i think.. thanks for the lead..
C&L Cold air, Functional Ram Air Hood, Hurst Short Throw, MAC Offroad Prochamber, Stainless Works Axle Back.
Go to home depot , they have a large selection of nuts n bolts all grades n sizes and they also have differnt types of finishes that won't corrode.
89 coupe -current / 00 super duty- BERNADINE
Originally Posted by ImpactStang
hope things dont get crazy in here...Dont wanna see anyone type the shit outta anyone else...it"s just not humane.
I imagine thats a metric nut you are looking for.
Never underestimate the unpredictability
of stupidity!
Just damn junk with a blow through
Shoot I could have sworn they came off with a 5/8 but it's been so long... I'll have to get under there and match it like Joe said
Lol I already went to home depot but I was in a rush and grabbed something totally wrong
C&L Cold air, Functional Ram Air Hood, Hurst Short Throw, MAC Offroad Prochamber, Stainless Works Axle Back.
Lowe's also has a big selection ... take it with you, and just match it up.
=================
1996 GT Vert
1968 "Vanilla" Coupe
=================
"Some mornings it just doesn't seem worth it to gnaw through the leather straps."
- Emo Phillips
5/8 wrench may have taken it off, but it's most likely not a 5/8 thread, which is what racer99 was referring to. I coulda given you a ride to the parts store or wherever if it's undriveable man...Shoot I could have sworn they came off with a 5/8 but it's been so long... I'll have to get under there and match it like Joe said
Lol I already went to home depot but I was in a rush and grabbed something totally wrong
02 Mustang GT, 2??rwhp/3??rwtq on 87 CMR Tune, Roush short throw rally style shifter, King Cobra Clutch, C&L 85mm CAI/Plenum, BBK/Roush 75mm T/B, Steeda U/D's, Kooks L/Ts w/catted X, Bassani Cat-back, Eibach Pro-kit Springs, Energy Suspension bushings, KYB AGX's, Hotchkis C/C plates, Steeda "Custom" Bump Steer, UPR ProStreet rear control arms, Brembo/Hawk, BFG's, Mach 1 Shaker, Dual Halo Projector 8k HIDs, Kenwood: KDC-X790, KAC-9102D, KAC-8402; Infinity: 6810CS, 6812CF; Orion XTRPro series subs
My car http://www.cardomain.com/ride/2628572
My truck http://www.cardomain.com/ride/2206751
Yea, take the same nut off of the other side and match it up... Most everything on your car will be metric, however a lot of exhaust thread is still standard...
Wow I had no idea lol I picked up a shift today, I don't think I'll be able to get to it today... And stupid valentines day tomorrow
C&L Cold air, Functional Ram Air Hood, Hurst Short Throw, MAC Offroad Prochamber, Stainless Works Axle Back.
Slacker...
02 Mustang GT, 2??rwhp/3??rwtq on 87 CMR Tune, Roush short throw rally style shifter, King Cobra Clutch, C&L 85mm CAI/Plenum, BBK/Roush 75mm T/B, Steeda U/D's, Kooks L/Ts w/catted X, Bassani Cat-back, Eibach Pro-kit Springs, Energy Suspension bushings, KYB AGX's, Hotchkis C/C plates, Steeda "Custom" Bump Steer, UPR ProStreet rear control arms, Brembo/Hawk, BFG's, Mach 1 Shaker, Dual Halo Projector 8k HIDs, Kenwood: KDC-X790, KAC-9102D, KAC-8402; Infinity: 6810CS, 6812CF; Orion XTRPro series subs
My car http://www.cardomain.com/ride/2628572
My truck http://www.cardomain.com/ride/2206751
haha slacker???
... 13 days in a row working.. 12 being at 2 jobs lol ill get around to playing with my nuts
C&L Cold air, Functional Ram Air Hood, Hurst Short Throw, MAC Offroad Prochamber, Stainless Works Axle Back.
LMAO... that made me laugh. I didn't say you were slacking on your work! I just know when you said valentines day it made me laugh based on what you told me the other day... so you're slacking in that department.. haha. And of course, you need to play with your nuts if you want your ride to work right to get you to your 2 jobs!!!haha slacker???
... 13 days in a row working.. 12 being at 2 jobs lol ill get around to playing with my nuts
02 Mustang GT, 2??rwhp/3??rwtq on 87 CMR Tune, Roush short throw rally style shifter, King Cobra Clutch, C&L 85mm CAI/Plenum, BBK/Roush 75mm T/B, Steeda U/D's, Kooks L/Ts w/catted X, Bassani Cat-back, Eibach Pro-kit Springs, Energy Suspension bushings, KYB AGX's, Hotchkis C/C plates, Steeda "Custom" Bump Steer, UPR ProStreet rear control arms, Brembo/Hawk, BFG's, Mach 1 Shaker, Dual Halo Projector 8k HIDs, Kenwood: KDC-X790, KAC-9102D, KAC-8402; Infinity: 6810CS, 6812CF; Orion XTRPro series subs
My car http://www.cardomain.com/ride/2628572
My truck http://www.cardomain.com/ride/2206751
bahahaha shit i forgot about that... yeah i may be in the dog house tomorrow, she wants to go see "valentines day" so i guess ill just sleep during the movie lol
C&L Cold air, Functional Ram Air Hood, Hurst Short Throw, MAC Offroad Prochamber, Stainless Works Axle Back.
Its a metric nut; yes, a 5/8 will get it loose, but the threads on stock parts are metric. Normally a 15mm wrench is used on it.
Advance Auto usually has a nice assortment of metric hardware.
-- Mike -- 2005 Automatic
(Stock V6 w/Vortech SQ2 Supercharger w/air-air intercooler, 310 rwhp: sold)
Stroked/Forged/Cammed V8 swapped-in, Kenne Bel 2.6L @12 psi
ARH LT headers, high flow cats; 8.8 GT500 rear end w/3.73s, LPW girdle, alum driveshaft; Steeda sport springs, UCA, panhard bar & brace; CHE lca's & relocation brackets; Tokico D-Specs
Posting Permissions
Reply With Quote
