dyno and tune!!!

black_stang_02 · 02-01-2008, 07:31 PM

Im finally taking my stang to get tuned. what do you guys and gals think Ill end up with? hp wise. I have all the basic bolt ons and VT stage 2 cams. I cant wait. I have to be there at 1030AM. Ill post the actual numbers tomorrow when its all said and done.

ChrisGT2000 · 02-01-2008, 08:51 PM

cool can't wait to see what u do I would guess 260-290 to wheels thats my un expertice guess. You going to biffs me an mig prob will head out there about 9

96greengt · 02-02-2008, 12:05 AM

Try out stangfreak.. he does tuning but does not do dyno...

I am interested in his capabilities as well.

Otherwise, who is doing the tune/dyno?

I say you will be about 277-284hp.

**Lethal Performance** · 02-02-2008, 07:46 AM

If I am not mistaken he is coming to us for a tune.

96greengt · 02-02-2008, 08:35 AM

You need to get mine in.. I wanna know the numbers it makes.

**Lethal Performance** · 02-02-2008, 08:37 AM

Quote:

Originally Posted by 96greengt

You need to get mine in.. I wanna know the numbers it makes.

All you have to do is PM when you are free.

96greengt · 02-02-2008, 08:39 AM

Danny was gonna call me and set a date, but he did not get back. I don't wanna hijack this thread.... but I'll call you direct. Plus....... get my headers, I have CASH !!

4.6stanger · 02-02-2008, 08:42 AM

Im gussin 280-290, Ive seen a few a guys running 292hp with basic bolt ons and cams and an aggresive tune!! Welll then again thats what they say! LOL

**Lethal Performance** · 02-02-2008, 08:43 AM

Quote:

Originally Posted by 96greengt

Danny was gonna call me and set a date, but he did not get back. I don't wanna hijack this thread.... but I'll call you direct. Plus....... get my headers, I have CASH !!

Ill get the ball rolling. Ill pm you later on today. Let Danny get up

96greengt · 02-02-2008, 09:17 AM

Quote:

Originally Posted by 4.6stanger

Im gussin 280-290, Ive seen a few a guys running 292hp with basic bolt ons and cams and an aggresive tune!! Welll then again thats what they say! LOL

I forgot his actual bolt ons.

Quote:

Originally Posted by Lethal Performance

Ill get the ball rolling. Ill pm you later on today. Let Danny get up

Ok, just let me know.

black_stang_02 · 02-02-2008, 09:59 AM

Quote:

Originally Posted by Lethal Performance

If I am not mistaken he is coming to us for a tune.

thats right, I spoke with you on thursday I think. cant wait to get there.

**Lethal Performance** · 02-02-2008, 10:04 AM

Quote:

Originally Posted by black_stang_02

thats right, I spoke with you on thursday I think. cant wait to get there.

Yea I wasnt sure.

I knew I had talked to someone. But dayum I get consumed in phone calls!

Which is a good thing!

4.6stanger · 02-02-2008, 02:17 PM

So what the verdict on the Numbers????

black_stang_02 · 02-02-2008, 05:51 PM

Quote:

Originally Posted by 4.6stanger

So what the verdict on the Numbers????

286 hp and 288 torque. it runs alot better now.

Bigdrumma22 · 02-02-2008, 06:00 PM

Quote:

Originally Posted by black_stang_02

286 hp and 288 torque. it runs alot better now.

So what could I expect with all the bolt ons, but no cams? And about how much is engine hp then... 300-310?

jmblownws6 · 02-02-2008, 06:36 PM

Quote:

Originally Posted by black_stang_02

286 hp and 288 torque. it runs alot better now.

I hope you are happy. Any problems dont hesitate to pm us. I know how cammed cars can take more time than just the normal bolton cars.

96greengt · 02-02-2008, 06:41 PM

Quote:

Originally Posted by black_stang_02

286 hp and 288 torque. it runs alot better now.

Sweet

Quote:

Originally Posted by 96greengt

I say you will be about 277-284hp.

I was off by 2 hp .....

Quote:

Originally Posted by jmblownws6

I hope you are happy. Any problems dont hesitate to pm us. I know how cammed cars can take more time than just the normal bolton cars.

Sean is gonna have fun with mine, I wanna bump the red line to about 7,200 rpm.

black_stang_02 · 02-02-2008, 07:22 PM

Quote:

Originally Posted by jmblownws6

I hope you are happy. Any problems dont hesitate to pm us. I know how cammed cars can take more time than just the normal bolton cars.

very happy. sean, thanks for your time. And Ill be sure to send you guys some more work. Ill post some vids of the dyno pulls. again thank you guys very much.

black_stang_02 · 02-02-2008, 08:09 PM

here are some vid's. enjoy.
ImageShack - Hosting :: stang101rw6.flv
ImageShack - Hosting :: stang100so0.flv
ImageShack - Hosting :: stang099vu9.flv
ImageShack - Hosting :: stang104xe8.flv
ImageShack - Hosting :: stang103is2.flv

tpcobra95 · 02-02-2008, 11:45 PM

that is flippin sweet, I want to get my car done now!!

02-01-2008, 07:31 PM	#1
black_stang_02 Black Ownz Join Date: Apr 2007 Location: San Antonio TX Posts: 431 Trader Rating: (6)	dyno and tune!!! Im finally taking my stang to get tuned. what do you guys and gals think Ill end up with? hp wise. I have all the basic bolt ons and VT stage 2 cams. I cant wait. I have to be there at 1030AM. Ill post the actual numbers tomorrow when its all said and done. Last edited by black_stang_02; 02-01-2008 at 07:34 PM.

02-02-2008, 12:05 AM	#3
96greengt LOL @ your mom Join Date: Feb 2007 Location: N.E. SA Posts: 8,683 Trader Rating: (21)	Try out stangfreak.. he does tuning but does not do dyno... I am interested in his capabilities as well. Otherwise, who is doing the tune/dyno? I say you will be about 277-284hp. __________________ Built 00 Windsor engine, .20 over, 11.6:1cr, fully ported heads, Hardballer intake w/cooling mod, Scat rods, Probe pistons, Cobra crank, tri-metal Clevite race bearings, VT Stage 2 N/A cams, adjustable cam gears, Canton windage tray, MMR oil pump, Cobra pick up, 75MM Accufab t-body, Dragon plenum, JLT CAI, 24# injectors, Bassani mid lengths, mufflers & O/R X,255lph fuel pump, BBK FPR, Fidanza aluminum flywheel, AJE K-member, ARP hardware everywhere, X-Cal SCT custom tuned, 3.73's, Pro 5.0, polygraphite motor mounts, over 300+ RWHP & 320+ TQ

02-02-2008, 07:46 AM	#4
Lethal Performance LSS Sponsor Join Date: Jun 2007 Location: SA,TX Posts: 361 Trader Rating: (1)	If I am not mistaken he is coming to us for a tune. __________________ www.lethalperformancesatx.com New website Dyno Tuning with: Hp tuners,SCT,Diablo and LT1 edit Email us at lethalperformance@yahoo.com. We will get back with you Open Tuesday thru Friday 9:00am to 6:30pm Saturday's by appointment only

02-02-2008, 08:35 AM	#5
96greengt LOL @ your mom Join Date: Feb 2007 Location: N.E. SA Posts: 8,683 Trader Rating: (21)	You need to get mine in.. I wanna know the numbers it makes. __________________ Built 00 Windsor engine, .20 over, 11.6:1cr, fully ported heads, Hardballer intake w/cooling mod, Scat rods, Probe pistons, Cobra crank, tri-metal Clevite race bearings, VT Stage 2 N/A cams, adjustable cam gears, Canton windage tray, MMR oil pump, Cobra pick up, 75MM Accufab t-body, Dragon plenum, JLT CAI, 24# injectors, Bassani mid lengths, mufflers & O/R X,255lph fuel pump, BBK FPR, Fidanza aluminum flywheel, AJE K-member, ARP hardware everywhere, X-Cal SCT custom tuned, 3.73's, Pro 5.0, polygraphite motor mounts, over 300+ RWHP & 320+ TQ

02-02-2008, 08:39 AM	#7
96greengt LOL @ your mom Join Date: Feb 2007 Location: N.E. SA Posts: 8,683 Trader Rating: (21)	Danny was gonna call me and set a date, but he did not get back. I don't wanna hijack this thread.... but I'll call you direct. Plus....... get my headers, I have CASH !! __________________ Built 00 Windsor engine, .20 over, 11.6:1cr, fully ported heads, Hardballer intake w/cooling mod, Scat rods, Probe pistons, Cobra crank, tri-metal Clevite race bearings, VT Stage 2 N/A cams, adjustable cam gears, Canton windage tray, MMR oil pump, Cobra pick up, 75MM Accufab t-body, Dragon plenum, JLT CAI, 24# injectors, Bassani mid lengths, mufflers & O/R X,255lph fuel pump, BBK FPR, Fidanza aluminum flywheel, AJE K-member, ARP hardware everywhere, X-Cal SCT custom tuned, 3.73's, Pro 5.0, polygraphite motor mounts, over 300+ RWHP & 320+ TQ

02-01-2008, 08:51 PM	#2
ChrisGT2000 Registered User Join Date: Apr 2007 Location: san antonio Posts: 855 Trader Rating: (5)	cool can't wait to see what u do I would guess 260-290 to wheels thats my un expertice guess. You going to biffs me an mig prob will head out there about 9

02-02-2008, 08:42 AM	#8
4.6stanger Three-hundredths of a second away from it!!!! Join Date: Apr 2007 Location: Lufkin, Texas Posts: 2,740 Trader Rating: (2)	Im gussin 280-290, Ive seen a few a guys running 292hp with basic bolt ons and cams and an aggresive tune!! Welll then again thats what they say! LOL __________________ What will it be, Breakin 12's or Breakin drivetrain.

02-02-2008, 02:17 PM	#13
4.6stanger Three-hundredths of a second away from it!!!! Join Date: Apr 2007 Location: Lufkin, Texas Posts: 2,740 Trader Rating: (2)	So what the verdict on the Numbers???? __________________ What will it be, Breakin 12's or Breakin drivetrain.

02-02-2008, 08:09 PM	#19
black_stang_02 Black Ownz Join Date: Apr 2007 Location: San Antonio TX Posts: 431 Trader Rating: (6)	here are some vid's. enjoy. ImageShack - Hosting :: stang101rw6.flv ImageShack - Hosting :: stang100so0.flv ImageShack - Hosting :: stang099vu9.flv ImageShack - Hosting :: stang104xe8.flv ImageShack - Hosting :: stang103is2.flv

02-02-2008, 11:45 PM	#20
tpcobra95 SN-95 Enthusiast Join Date: Dec 2005 Location: San Antonio,Tx Posts: 793 Trader Rating: (4)	that is flippin sweet, I want to get my car done now!! __________________ 95 COBRA= Project Dark Venom 98 GT= DD

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: