[Zylone]

Just to let you guys know, we should be having a Dyno Day soon here in CC at Clarkwood Dyno. Last time I talked to Doug over there he needed to send his equipment off for recalibration. If I remember correctly it is a DynoJet and he does have an air/fuel meter. I will be getting the info together and hopefully setting up a get together out ther. It is alot of fun, and there are always other cool cars out there, not just mustangs, like a 500+ rwhp turbo Grand National that is just killer!

Let me know if any of you guys are interested!

[fret440]

possibly, how will it be for how many runs? and what software/ tuners do they support?

(side note: sorry for killing that last thread, i was being funny[or trying])

[Zylone]

I still need to get the pertinent information and everything, but I think last time we were there, it was $50 for three runs and that was with the a/f wideband... I will post up once I get more information!

Oh yeah, it is just a dyno shop.. they don't do tunning, unless ofcourse Phil (local ford mechanic/drag racing guru) is there to help out or something, for example, I am gonna have him help me tweak my timing, a/f ration, etc while I am there to dial everything in!

[Stang6uy]

How long has there been a dyno in CC I have been away from home for about 6yrs now and I'm comming home 15th apr looking forward to it tired of being at 6000ft above sea level :thumbdown

[Zylone]

I am not quite sure this one has been there, apparently for quite some time from talking to the local's... I just have been out of the hot rod scene for so many years, I didn't even know about alot of the shop's around either!

[fret440]

Hey, I'm up for this. I can at least get a baseline and find out how close how my a/f ratio is.

[ltl 281]

If he recalibrated it count me in.....last time I dynoed the air/fuel was way off.

[Zylone]

Pace said last night that everything is ready to go, he ran his GN last weekend I beleive... I will give him a hollar and see what is up with getting a time setup, I think he was already looking into it..

[fret440]

saturday would be great:blkvnm:

....or just let us know:mick:

[pacemkr86]

we are going to be there on sat. afternoon

[fret440]

Originally Posted by pacemkr86

we are going to be there on sat. afternoon

great, now all I need to know is how to get there...or cruise to it?

[BlueStangChik]

aww too bad i have to work sat and there is a dyno here in NB on sunday, if there wasnt id be there for sure.
-Tanya

[pacemkr86]

[Zylone]

Hey pace! Nice to see ya made it over here :mick:

We will be hitting it up at 12 noon this saturday! I will try and give some directions hehe... go out like you are heading towards the air port... and a few miles out there, past the air port you got clarkwood, and a stop light. The only light out there, on the left is a gas station, and on the right is an old blue building, this is it... can't miss it, doesn't look like much, just pull in, drive over the rail road tracks and through the fence, and the first building there on the left is the dyno =) my # is 718-986-0626 if ya need directions better than that =)

I am going to take my camcorder as well just for the heck of it =)

[ltl 281]

Damn I have to work Saturday.....

[Zylone]

D'oh! Well, it is still on, should be out there around 12-12:30 saturday morning! I know pace and I will be out there, and there are a few people that are reserved to make a few runs.. should be alot of fun =) I hope to get my car on there finally and get pace to help me tweak her a little bit!

[fret440]

i'll be there...gotta be alot more fun than sitting on my butt all day:mick:

[Zylone]

Sweet man! I will PM ya my # just to make sure you make it out there, it is kinda out there hehe

[pacemkr86]

[fret440]

yeah, it was great meeting all y'all out there. Sweet picture of the camaro and carb off to the side. We have video somewhere yes? Phil, nice to meet you. Kevin, what's up.? Good to meet the CCSS guys too. BBQ next time? I'll host....