[Agent Jones]

Some friends of mine and I will be crusing over to the Dyno Day at Murillo Motorsports Saturday March 1st, 2008. Anyone else wanna join? We are thinking of meeting up at the Ingram Park Mall around 10-10:30am and making additonal stops along 410 if anyone wants to join up. The cost is $45 for 2 pulls. I will be bringing my camcorder if anyone wants to have theirs videotaped. Also if you want to be guanteed to have a spot you need to RSVP. I called Murillo and they said it is open to eveyone but RSVP has priority. If you want more information you can pm me.

Address and phone number to Murillos
6214 Krempen Ave
San Antonio, TX 78233-4579
Phone: (210) 946-1199

[Blown01snake]

I'm probably gonna be down to go hang out, but I just had mine tuned. I'll just go to hang with fellow stangers!

[Agent Jones]

cool, what side of town are you on and did you wanna cruise over there with us or just meet there

[Blown01snake]

I live in pleasanton so anywhere is a drive for me. I keep the coupe at my shop on East houston and 410 pretty much

[SUfanINsa]

sweet now i know where to take it from!!!

[Agent Jones]

Originally Posted by Blown01snake

I live in pleasanton so anywhere is a drive for me. I keep the coupe at my shop on East houston and 410 pretty much

ok so it would be best for you just to meet up there. what time are you gonna get there?

[voodookills31]

im down..if its not raining....

[03 R Code]

Where abouts in the Ingram mall parking lott? I'll be there about 10 or a little after and cruise around with you guys. I don't think I'll be getting dyno'd just yet though.

[Blown01snake]

What time you guys going? I gotta go to my shop in the morning so I can mop the floor and get ready for next week.

[Agent Jones]

We will meet near the Chick Fila on Ingram road. I will be there around 10-10:15ish.

[voodookills31]

hey im gonna meet up with yall tommorrow....i was wondering if while we are aiting to get dyno'd....if someone can put on my dist cap,rotor,sparks,spark wire, and fuel filter? if someone can do this before i get dyno'd(because i dont completly know how to it) i will pay their 45 bucks....perferably someone who knows how

[Ryan_65Stallion]

Originally Posted by voodookills31

hey im gonna meet up with yall tommorrow....i was wondering if while we are aiting to get dyno'd....if someone can put on my dist cap,rotor,sparks,spark wire, and fuel filter? if someone can do this before i get dyno'd(because i dont completly know how to it) i will pay their 45 bucks....perferably someone who knows how

Shiat. I'll do that! I really want to get mine dynoed. even though you guys will be pulling bigger numbers than me. oh well, but I'll be glad to do that.

Jones, what time is this going to be over? I was thinking we could all cruise over to Fudd's afterwards??? And I'll have my video camera so I can film for my Mustang Documentry if no one minds

[Agent Jones]

Originally Posted by Ryan_65Stallion

Shiat. I'll do that! I really want to get mine dynoed. even though you guys will be pulling bigger numbers than me. oh well, but I'll be glad to do that.

Jones, what time is this going to be over? I was thinking we could all cruise over to Fudd's afterwards??? And I'll have my video camera so I can film for my Mustang Documentry if no one minds

Dyno day is over at 4pm. I have to be at work by 4:30, so i will be leaving around 3:30pm.

[Agent Jones]

I will be at Ingram Park Mall near chic-fil-a between 10:15 and 10:30. I might be there by myself beacause two of my friends got called into work. So if anyone wants to go with me be there before 10:30am

[Ryan_65Stallion]

Hmmm... I'll see if voodoo replies and make my decision from there. I know every starts meeting up at Fudd's around 8 so I don't want to be in town with nothing to do but sit, and I don't want to drive in and back home and than back in again.

[voodookills31]

Originally Posted by Ryan_65Stallion

Hmmm... I'll see if voodoo replies and make my decision from there. I know every starts meeting up at Fudd's around 8 so I don't want to be in town with nothing to do but sit, and I don't want to drive in and back home and than back in again.

yeah....do you want to do it at chick fil a or at marillos?
what tools do i need to bring for this or do you have them?

[Ryan_65Stallion]

Doesn't matter, is your distributor stock or after market, it depends on the rotor style if I can do it or not.
I have tools, but bring a plug socket, cause mine might not fit yours being my spark plugs are different thread size from yours.
Which stang is it, the 92 or 87?

[voodookills31]

the 92...i was thinking...i can buy the stuff after you take a look at it...... and then you can put it in b/c im not sure what kind of dis,fuel filter,rotor and plugs i need. maybe we can stop at a napa or i can buy it at marillos......
my dad is my mechanic and he knows all of my car details....im just a driver and i know very little about the way it works. he is out of town....so he cant do it for me....but def. if you can do this i would appriciate it and i WILL pay for you dyno run.
p.s. you can record my car if you want.....would be fun

[Ryan_65Stallion]

K, it'll be easy. I can show you how to do your plugs and wires too. I drive a '65 coupe, so you were going to be at murillos or meet up at ingram?
cause I'm going to meet up at ingram with Ray(Agent Jones)

[mustangmelish]

dang wish i could make this. then i could show yall how a non fi v6 is supposed to be :P

i get off work at 4 though so this is outta the question. but ill def be at fudds! let me know what kind of numbers everyone is puttin down!