Egr Do it yourself MIL Eliminator

**12second5.0** · 05-06-2006, 12:48 PM

This is a quick and safe way to get rid of your egr warning light, when you run your car without the egr valve.

Disconnect your EGR wire harness

You will need to go to radio shack and purchase 3 resistor's, 2- 3.9k ohm 1/2 watt resistor's and 1- 390 ohm 1/2 watt resistor.

Use the attatched diagram, and solder the resistors as shown.

**12second5.0** · 06-14-2006, 10:45 PM

Here's a bigger pic......

05-06-2006, 12:48 PM	#1
12second5.0 Sie lieben, mich zu hassen! Join Date: Jun 2003 Location: Marion,Texas Posts: 9,013 Trader Rating: (0)	Egr Do it yourself MIL Eliminator This is a quick and safe way to get rid of your egr warning light, when you run your car without the egr valve. Disconnect your EGR wire harness You will need to go to radio shack and purchase 3 resistor's, 2- 3.9k ohm 1/2 watt resistor's and 1- 390 ohm 1/2 watt resistor. Use the attatched diagram, and solder the resistors as shown. Attached Images __________________

06-14-2006, 10:45 PM	#2
12second5.0 Sie lieben, mich zu hassen! Join Date: Jun 2003 Location: Marion,Texas Posts: 9,013 Trader Rating: (0)	Here's a bigger pic...... Attached Thumbnails __________________

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: