FOX 351W

rauls89stang · 10-07-2008, 01:13 PM

WHAT UP GUYS! JUST WONDERING IF ANY ONE HAD GOOD INFO OR PARTS LIST ON DOING A 351W SWAP INTO MY 89 MUSTANG IF SO ANY INFO APPRECIATED THANKS GUYS

PS. ANY PICS AND CLIPS WELCOMED

**thesource** · 10-07-2008, 06:24 PM

What would you like to know ? I own two Mustangs with stroked Windsors in them .

rauls89stang · 10-14-2008, 09:44 PM

CAN I STILL USE MY STOCK CROSSMEMBER OR DO I NEED A TUBULAR ONE?

I8URLS1 · 10-14-2008, 10:38 PM

Quote:

Originally Posted by rauls89stang

CAN I STILL USE MY STOCK CROSSMEMBER OR DO I NEED A TUBULAR ONE?

You can use your stock cross member. You are going to need a different oil pan and a different hood for sure as it sits higher than your 302. Also different balancer and flywheel I believe?

Mike (the source) will correct me if I am wrong.

racer99 · 10-15-2008, 09:12 AM

Swap headers so you can use your 302 exhaust.
Oil pan,balancer,distributor,hood scoop or cowl hood,
right balance flywheel or correct flexplate,intake manifold,
just a few things to think about.

**thesource** · 10-15-2008, 09:41 AM

Quote:

Originally Posted by rauls89stang

CAN I STILL USE MY STOCK CROSSMEMBER OR DO I NEED A TUBULAR ONE?

You can reuse the factory K member but if going with long tube headers , I would highly suggest looking into a tubular K member .

10-07-2008, 01:13 PM	#1
rauls89stang Registered User Join Date: Jul 2007 Location: uvalde Posts: 52 Trader Rating: (0)	FOX 351W WHAT UP GUYS! JUST WONDERING IF ANY ONE HAD GOOD INFO OR PARTS LIST ON DOING A 351W SWAP INTO MY 89 MUSTANG IF SO ANY INFO APPRECIATED THANKS GUYS PS. ANY PICS AND CLIPS WELCOMED

10-07-2008, 06:24 PM	#2
thesource LSS Sponsor Join Date: Nov 2004 Location: in a hole building transmissions Posts: 3,495 Trader Rating: (13)	What would you like to know ? I own two Mustangs with stroked Windsors in them . __________________ Texas Motorsports Myspace Texas Motorsports Photobucket

10-15-2008, 09:12 AM	#5
racer99 Box Foxes Rule!!! Join Date: Feb 2005 Location: San Antonio TX Posts: 1,372 Trader Rating: (1)	Swap headers so you can use your 302 exhaust. Oil pan,balancer,distributor,hood scoop or cowl hood, right balance flywheel or correct flexplate,intake manifold, just a few things to think about. __________________ Never underestimate the unpredictability of stupidity! 78 Zephyr, 82 Granada Wagon, 88 Mustang 2.3T 94 GT

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

10-14-2008, 09:44 PM	#3
rauls89stang Registered User Join Date: Jul 2007 Location: uvalde Posts: 52 Trader Rating: (0)	CAN I STILL USE MY STOCK CROSSMEMBER OR DO I NEED A TUBULAR ONE?