Frankenstein Mufflers

RAdman · 02-21-2008, 07:37 PM

I gutted my stock mufflers and they sounded great!

Plasma torch through two skins.

Keep the torch handy and cut out the baffle plates and open up the resonator.

Tig weld 'em back up. Don't leave any scraps inside or they will rattle!

It was too loud when I added an OR H pype so I went back to stock mufflers.

Agent Jones · 02-21-2008, 08:05 PM

so thats what the inside of my mufflers use to look like. Nice job
do u have any other pics in different angles??

RAdman · 02-21-2008, 08:33 PM

Just a few.

longhornd00d · 02-21-2008, 08:37 PM

Just curious, how much did it change the sound when you did that?

Magnapack97 · 02-22-2008, 12:30 AM

post up a vid RAdman

BigJnSA · 02-22-2008, 07:52 AM

thats a pretty damn good idea. you come up with it yourself?

95 GTS · 02-22-2008, 11:36 AM

Tuuuurbulence

Stumpy · 02-22-2008, 11:57 AM

i wonder how my flows would sound if that was done.

that's a very creative way to get the loudness you want.

95 GTS · 02-22-2008, 01:44 PM

like 1 chamber flows

have you seen the inside of flows? It uses rows of angled aluminum to deflect sound. the 1 chamber are ust very open with only 2

BPAs old car has a set that the angles had broken up. some were rattling and every now and then it would shoot a piece of metal out while doing a burnout at the track. we tried with vicegrips to pull it out but never could get it.

RAdman · 02-24-2008, 10:00 AM

It's the poor mans fix. If you have access to the tools then the only real costs are welding supplies. Cheap.

Installation takes 30 min.

You can pick up a new set of mufflers from Brenspeed for about $90 in case you want to keep a factory set around.

seco · 02-25-2008, 11:27 AM

1 chamber flows FTW - wish I had them

02-21-2008, 07:37 PM	#1
RAdman Registered User Join Date: Feb 2008 Location: Kingwood Posts: 80 Trader Rating: (0)	Frankenstein Mufflers I gutted my stock mufflers and they sounded great! Plasma torch through two skins. Keep the torch handy and cut out the baffle plates and open up the resonator. Tig weld 'em back up. Don't leave any scraps inside or they will rattle! It was too loud when I added an OR H pype so I went back to stock mufflers. Attached Thumbnails __________________ Addicted.

02-21-2008, 08:33 PM	#3
RAdman Registered User Join Date: Feb 2008 Location: Kingwood Posts: 80 Trader Rating: (0)	Just a few. Attached Thumbnails __________________ Addicted.

02-21-2008, 08:37 PM	#4
longhornd00d Registered User Join Date: Feb 2008 Location: Austin Posts: 6 Trader Rating: (0)	Just curious, how much did it change the sound when you did that? __________________ 2008 Black on Black Leather Mustang GT (M5) SLP Loudmouths, SLP X-pipe with cats, Tinted tail lights, brake light, and rear side markers, Shorty Antenna, UT Austin Specialty License Plates Used to own: 2005 Redfire Mustang 4.0 1998 Laser Red Mustang Cobra with a Novi 1000RR

02-22-2008, 12:30 AM	#5
Magnapack97 You will never get this Join Date: May 2007 Location: Sweetwater/Abilene, TX Posts: 381 Trader Rating: (0)	post up a vid RAdman __________________ '97 GT www.AbileneMustangs.net

02-22-2008, 11:36 AM	#7
95 GTS Back in the saddle again Join Date: Feb 2006 Location: Texas Posts: 1,500 Trader Rating: (0)	Tuuuurbulence __________________ 2007 Reflex Silver Wolfsburg Jetta - new hotness 1995 Canary Yellow GTS - Sold 12.81@106.2 w/1.80 60' Boltons/E303 + 3100 lbs + M&H 246 HP/ 290 TQ 12.57 @ 109.21 w/1.76 60' Boltons/GT40Ps/XE270 + 3240 lbs + 555Rs 295 HP / 321 TQ

02-21-2008, 08:05 PM	#2
Agent Jones Get It? Join Date: Mar 2006 Location: San Antonio Posts: 7,157 Trader Rating: (1)	so thats what the inside of my mufflers use to look like. Nice job do u have any other pics in different angles??

02-22-2008, 11:57 AM	#8
Stumpy You're a freak. Like me. Join Date: Nov 2006 Location: Katy Posts: 1,031 Trader Rating: (0)	i wonder how my flows would sound if that was done. that's a very creative way to get the loudness you want. __________________ Where I am, people's voices make hollow sounds. Just be quiet, they'll go away.

02-22-2008, 01:44 PM	#9
95 GTS Back in the saddle again Join Date: Feb 2006 Location: Texas Posts: 1,500 Trader Rating: (0)	like 1 chamber flows have you seen the inside of flows? It uses rows of angled aluminum to deflect sound. the 1 chamber are ust very open with only 2 BPAs old car has a set that the angles had broken up. some were rattling and every now and then it would shoot a piece of metal out while doing a burnout at the track. we tried with vicegrips to pull it out but never could get it. __________________ 2007 Reflex Silver Wolfsburg Jetta - new hotness 1995 Canary Yellow GTS - Sold 12.81@106.2 w/1.80 60' Boltons/E303 + 3100 lbs + M&H 246 HP/ 290 TQ 12.57 @ 109.21 w/1.76 60' Boltons/GT40Ps/XE270 + 3240 lbs + 555Rs 295 HP / 321 TQ

02-24-2008, 10:00 AM	#10
RAdman Registered User Join Date: Feb 2008 Location: Kingwood Posts: 80 Trader Rating: (0)	It's the poor mans fix. If you have access to the tools then the only real costs are welding supplies. Cheap. Installation takes 30 min. You can pick up a new set of mufflers from Brenspeed for about $90 in case you want to keep a factory set around. __________________ Addicted.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: