FS: Centerforce Dual Friction Clutch - Lone Star Stangs

grimloktt · 10-25-2005, 06:32 PM

10.4"/ 10 spline

Only 25 miles on assembly--still has red protective covering Centerforce uses on clutch disc!!! (Didn't like operation; replaced w/ stock clutch.)

VERY slight dent on one weight where the input shaft slid past that DOES NOT affect operation. (No mass was removed and dent is less than a penny thick...barely visible. Just want to be 100% honest.)

E-mail w/ any additional questions: Grimloktt@earthlink.net

Price: $230
Shipping: $20

CrewChiefLite · 10-26-2005, 11:03 AM

What tranny is it for?

grimloktt · 10-26-2005, 05:30 PM

It's part number DF021057 and it holds up to 450 ft lbs.

According to Centerforce's spec sheet here ( http://www.centerforce.com/clutches....0II%2C%20COBRA ) this application is for:
- 94-99 Saleen engines
- 93-95 5.0L 302" cobra
- 94-95 5.0L 302" engine
- 96-2001 GT's with T45.

Even though it's a different number, this clutch is more than capable (and fits) per Mr. Warner at Centerforce:
- 86-96 GTs

After all that is said, I used it in a Tremec 3650 transmission with an alumimun flywheel that accepts 10.4" applications.

grimloktt · 11-17-2005, 08:27 PM

Still for sale...

10-25-2005, 06:32 PM	#1
grimloktt Registered User Join Date: Feb 2004 Location: San Antonio, TX Posts: 41	FS: Centerforce Dual Friction Clutch 10.4"/ 10 spline Only 25 miles on assembly--still has red protective covering Centerforce uses on clutch disc!!! (Didn't like operation; replaced w/ stock clutch.) VERY slight dent on one weight where the input shaft slid past that DOES NOT affect operation. (No mass was removed and dent is less than a penny thick...barely visible. Just want to be 100% honest.) E-mail w/ any additional questions: Grimloktt@earthlink.net Price: $230 Shipping: $20 Attached Thumbnails

10-26-2005, 11:03 AM	#2
CrewChiefLite the wheel goes round Join Date: Aug 2005 Location: Spring TX Posts: 2,444	What tranny is it for? __________________ Car Car Car Truck

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

10-26-2005, 05:30 PM	#3
grimloktt Registered User Join Date: Feb 2004 Location: San Antonio, TX Posts: 41	It's part number DF021057 and it holds up to 450 ft lbs. According to Centerforce's spec sheet here ( http://www.centerforce.com/clutches....0II%2C%20COBRA ) this application is for: - 94-99 Saleen engines - 93-95 5.0L 302" cobra - 94-95 5.0L 302" engine - 96-2001 GT's with T45. Even though it's a different number, this clutch is more than capable (and fits) per Mr. Warner at Centerforce: - 86-96 GTs After all that is said, I used it in a Tremec 3650 transmission with an alumimun flywheel that accepts 10.4" applications.

11-17-2005, 08:27 PM	#4
grimloktt Registered User Join Date: Feb 2004 Location: San Antonio, TX Posts: 41	Still for sale...