[stangfreak]

sorry I don't know what ftw or ftmtw means... (new to forums)

also sorry to hear you say no to lethal. I hope this is because you do your own work not because you have something against the shop. If that is the case, thanks for keeping that between yall.
as for the longhorn joke, that's all it was, a joke.

[VCS_SSSTANG]

Originally Posted by stangfreak

sorry I don't know what ftw or ftmtw means... (new to forums)

also sorry to hear you say no to lethal. I hope this is because you do your own work not because you have something against the shop. If that is the case, thanks for keeping that between yall.
as for the longhorn joke, that's all it was, a joke.

I do most of the work I can do ...
But uhm after the whole thing with greg, I think I'm good.

[99stang]

Originally Posted by VCS_SSSTANG

I do most of the work I can do ...
But uhm after the whole thing with greg, I think I'm good.

i'm sorry i just have to give a little chuckle about this.
and in my opinion i think lethal's a great shop, but they are more for the performance 8's (and they do good work on them) which is why i dont think that they are very into the 6er's. thats just my opinion. and trust me seans a great guy and does great work, if i took my car to lethal that would be the guy i would for sure want to work on my car. but then again i also do my own work.

[99stang]

[quote=stangfreak;452938]sorry I don't know what ftw or ftmtw means... (new to forums)QUOTE]

oooo and FTW = For The Win. which is thumbs up, very good, etc etc etc
and FTMFW= For The Motha F***in Win

[VCS_SSSTANG]

Originally Posted by 99stang

i'm sorry i just have to give a little chuckle about this.
and in my opinion i think lethal's a great shop, but they are more for the performance 8's (and they do good work on them) which is why i dont think that they are very into the 6er's. thats just my opinion. and trust me seans a great guy and does great work, if i took my car to lethal that would be the guy i would for sure want to work on my car. but then again i also do my own work.

>>> Yeah but I mean if you can do heads on a 5.0L you should be able to do heads on a 3.8L

[99stang]

Originally Posted by VCS_SSSTANG

>>> Yeah but I mean if you can do heads on a 5.0L you should be able to do heads on a 3.8L

yeah. but who knows. just like they said at lethal the head were worn. so who knows. i'm not taking sides, since gregs a friend, but then again if i ever want lethal to do any work for me i dont want to piss them off

[VCS_SSSTANG]

Well I talked to greg the entire way through that process...

Knew where the heads came from, etc.

The whole "you can't tune a cammed car in one day" comment got me~

[stangfreak]

Originally Posted by 99stang

i'm sorry i just have to give a little chuckle about this.
and in my opinion i think lethal's a great shop, but they are more for the performance 8's (and they do good work on them) which is why i dont think that they are very into the 6er's. thats just my opinion. and trust me seans a great guy and does great work, if i took my car to lethal that would be the guy i would for sure want to work on my car. but then again i also do my own work.

Thanks bro.

as for the Greg thing, he's a good guy and that install was before I got there.
But lets not forget why it is that his car was not finished there...
that was a bad situation between Greg and the shop, and between them is were that SHOULD stay.... If you are to base your opinions on that, hey I am not going to knock you for it... to each there own. Though it is cool to see someone who works on their own car. (even though I don't get paid...sniff) lol

[VCS_SSSTANG]

Originally Posted by stangfreak

Thanks bro.

as for the Greg thing, he's a good guy and that install was before I got there.
But lets not forget why it is that his car was not finished there...
that was a bad situation between Greg and the shop, and between them is were that SHOULD stay.... If you are to base your opinions on that, hey I am not going to knock you for it... to each there own. Though it is cool to see someone who works on their own car. (even though I don't get paid...sniff) lol

Sorry

I'm not saying lethal is a bad shop or anything...

[JB117]

Originally Posted by VCS_SSSTANG

The whole "you can't tune a cammed car in one day" comment got me~

He said you can't tune a cammed car in a day??? lol.
Have any of yall heard of Henderson Performance in New Braunfels? They are mostly a Corvette shop but they did great work on my six. They did mess up on the tune cause my IMRC wasn't plugged back in but they got it back in right away and didn't charge me a thing to correct it.

[VCS_SSSTANG]

Originally Posted by JB117

He said you can't tune a cammed car in a day??? lol.
Have any of yall heard of Henderson Performance in New Braunfels? They are mostly a Corvette shop but they did great work on my six. They did mess up on the tune cause my IMRC wasn't plugged back in but they got it back in right away and didn't charge me a thing to correct it.

Yeah...

[99stang]

Originally Posted by VCS_SSSTANG

Well I talked to greg the entire way through that process...

Knew where the heads came from, etc.

The whole "you can't tune a cammed car in one day" comment got me~

o trust me i was the same way. i have helped him through everything else, so yeah i know a lot of what has been happening

[99stang]

Originally Posted by stangfreak

Thanks bro.

as for the Greg thing, he's a good guy and that install was before I got there.
But lets not forget why it is that his car was not finished there...
that was a bad situation between Greg and the shop, and between them is were that SHOULD stay.... If you are to base your opinions on that, hey I am not going to knock you for it... to each there own. Though it is cool to see someone who works on their own car. (even though I don't get paid...sniff) lol

haha no problem

and what are you talking about not getting paid? for what? are you talking about the bumper or rear end? and who's the one who works on there own car? ahhhh overwhelming questions, haha

[stangfreak]

Ok slow one....lol
I was saying glad to see VCS SSSTANG works on his/her (don't know ya sorry) car. or anyone for that matter. I mean this is a hobby thing right? In my opinion that means get out there and get dirty and enjoy your car. Seeing people that do that is cool. As for getting paid...pay attention bro I don't want to loose you..... If you work on your own car (instead of bringing it to me) then I don't work on it (are you keeping up...) which means I don't get paid....(did I loose you)
Bwahahahah just phuking with ya Man

[lethal zo6]

Originally Posted by VCS_SSSTANG

>>> Yeah but I mean if you can do heads on a 5.0L you should be able to do heads on a 3.8L

Just to clear things up there was NOTHING wrong with Greggs install that Lethal did. A valve spring broke 3 months after, which had nothing to do with install.As far as the tune I think JM meant that they needed longer than 30 minutes that the impatient little fuck would give.

[lethal zo6]

Originally Posted by VCS_SSSTANG

Yeah...


http://i20.photobucket.com/albums/b2...lethal_cam.jpg

Why are you starting shit?

[jmblownws6]

Originally Posted by JB117

He said you can't tune a cammed car in a day??? lol.
Have any of yall heard of Henderson Performance in New Braunfels? They are mostly a Corvette shop but they did great work on my six. They did mess up on the tune cause my IMRC wasn't plugged back in but they got it back in right away and didn't charge me a thing to correct it.

Yea buddy. You know everything You guys think its so simple to tune and they are perfect in one day. LMAO Ask any real tuner and they will tell you the same thing. This isnt no prewritten tune. It takes time! Just slapping it on the dyno and checking AFR isnt everything to a tune. But hey what the fuck do I know? I only own 3 forced induction cars You can say what ever you want but ask a around. Most shops will give you your car back the same day but updates are done 95% of the time to adjust things. Its like saying ford wrote your oringal tune in one day and slapped it into every car in the US! LMAO Ever hear of an update tune from your dealer? SAME SHIT! Know what you are talking about before throwing your .02 in like you know anything about tuning.

[Lethal Performance]

I give up on the moderation on this board.

[jmblownws6]

Originally Posted by VCS_SSSTANG

Yeah...


http://i20.photobucket.com/albums/b2...lethal_cam.jpg

Wow you know how to print a screen and Quote me Bring your junk from college station and show me how much better you are.

[99stang]

Originally Posted by stangfreak

Ok slow one....lol
I was saying glad to see VCS SSSTANG works on his/her (don't know ya sorry) car. or anyone for that matter. I mean this is a hobby thing right? In my opinion that means get out there and get dirty and enjoy your car. Seeing people that do that is cool. As for getting paid...pay attention bro I don't want to loose you..... If you work on your own car (instead of bringing it to me) then I don't work on it (are you keeping up...) which means I don't get paid....(did I loose you)
Bwahahahah just phuking with ya Man

Gosh make me feel all retarded. Geezzz. Haha. Well i couldnt tell if you were saying you should have gotten money for something you did with my car, even though it was just the bumper.thats why i was confused ok. hahahahaha.