heads

chrajohns0 · 01-09-2007, 08:42 AM

i have a 68 that i am putting a 69 302 in thats going to .040 over and have been doing some reading that you can put 351 heads on it. anyone done this? want to know if its a good odea to do over the stock 302 heads.

**bighoss88lx** · 01-09-2007, 08:51 PM

Quote:

Originally Posted by chrajohns0

i have a 68 that i am putting a 69 302 in thats going to .040 over and have been doing some reading that you can put 351 heads on it. anyone done this? want to know if its a good odea to do over the stock 302 heads.

If you use the 69 or 70 351 heads its a decent upgrade over 302 heads except the GT40 style head. You will have to use special headbolts or stepped washers with the 302 headbolts to bolt them on.

keg65 · 01-09-2007, 08:53 PM

ARP sells the stepped bolts for this swap

01-09-2007, 08:42 AM	#1
chrajohns0 Registered User Join Date: Sep 2006 Location: West Texas Posts: 156 Trader Rating: (1)	heads i have a 68 that i am putting a 69 302 in thats going to .040 over and have been doing some reading that you can put 351 heads on it. anyone done this? want to know if its a good odea to do over the stock 302 heads. __________________ 95GT

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

01-09-2007, 08:53 PM	#3
keg65 Change always makes Sense (or Cents) Join Date: May 2005 Location: NE San Antonio Posts: 1,210 Trader Rating: (0)	ARP sells the stepped bolts for this swap