Hellion BBT76 Turbo Kit, 1200 Miles!

Nazman · 12-13-2007, 10:15 PM

This is for a 99-04 Cobra or Mach 1. Could work for a 99-04 GT with a diferent intake pipe.

This kit have been up-graded to the T76 with Ceramic Ball Bearing option, all the Cold and Hot side have been ceramic coated (over 1K invested in coatings).

This is what you get:

Hellion BBT76 Turbo Kit
-CBB Turbonetics T76 .96AR
-All Hot Side Ceramic Coated Black (2000F), from exhaust manifolds to CB Y Pipe (manifolds included)
-All Cold Side Ceramic Coated "Silver" (1000F)
-Turbonetics Evolution Waste Gate, with SS independent tubing for atmosphere venting
-XS Racer By-pass valve
-Complete Bolt-on

Manual Boost Controller Included!

Less than 1200 miles!!!!

Complete Hellion T76: $5000.00

Please, Serious Inquiries Only

PM or email at Stang32v@yahoo.com

**Lethal Performance** · 12-13-2007, 10:43 PM

TTT Saw this kit make close to 700 rwhp.

**ANRmotorsports** · 12-13-2007, 11:04 PM

Nice kit... BTW this is Robert with the SRT8 and SRT10!!!

RaceRat · 12-13-2007, 11:21 PM

Quote:

Originally Posted by Lethal Performance

TTT Saw this kit make close to 700 rwhp.

Someone over there needs to put this on their Terminator!

ChrisGT2000 · 12-14-2007, 12:23 AM

yep I saw one on youtube going down the track damn thing sounded like a jet.

jmblownws6 · 12-14-2007, 12:57 AM

Quote:

Originally Posted by RaceRat

Someone over there needs to put this on their Terminator!

No. Allready becoming a whipple dealer

So that will not work

Besides too much crap to change.

Nazman · 12-14-2007, 03:43 PM

Quote:

Originally Posted by jmblownws6

No. Allready becoming a whipple dealer

So that will not work

Besides too much crap to change.

Not really, all bolt on. But yes, the Whipple swap is much easier!!

Naz

racer99 · 12-14-2007, 06:18 PM

Naz,Whats next?

jmblownws6 · 12-14-2007, 10:39 PM

Quote:

Originally Posted by racer99

Naz,Whats next?

Since I am in the small circle of trust Ill say this. Alot of spray and some stroke

racer99 · 12-15-2007, 09:09 AM

Back to the spray,Naz and I talked about
that when I bought the wheels from him.

Nazman · 12-15-2007, 10:50 AM

Available!!!!!!!!

Come Get It!

**psiperformance** · 12-15-2007, 11:03 AM

kits very clean have seen it on our dyno

Nazman · 12-15-2007, 11:13 AM

Here are a few pics.....

Turbo:

Intercooler:
-Ceramic Coated with Thermal Dispersant (Black)

Turbonetics "Evolution" BOV
-Moded to vent to atmosphere (all 304 Stainless tubing and TIG Welded)
-2 Springs (7LBS & 9LBS) as well as Shims (all shims 5 shims brings 11 PSI)

Turbo X/S Race By-Pass Valve
-5 Shims included

Ceramic Coated Hot Piping Black (2000F)

Come get it!

Nazman · 12-15-2007, 11:16 AM

Video of the Turbo Kit in "Action"!

Hear it!

Naz

**lazer96gt** · 12-15-2007, 12:12 PM

I've seen this car in action and that Turbo (and car) is an animal. good luck with the sale.

TonyToughNuts · 12-15-2007, 07:12 PM

besides forged internals, what mods would it take to make that work on a 2v?

thatdavidkid · 12-15-2007, 08:41 PM

if i'm not mistaken... isn't the bullit throttle body very similar to the 4v?

Nazman · 12-15-2007, 08:47 PM

Quote:

Originally Posted by TonyToughNuts

besides forged internals, what mods would it take to make that work on a 2v?

You could run stock internals if you keep the boost down to ~8-10 PSI which the kit comes with the springs for 7 and 9 PSI as well as the shims and manual controller.

At ~8-10PSI you will be into the 500 with ease. I was able to make 605RWHP @ 12 PSI my self.

You will need an UPR K-Member.....~600 and some change.

Other than that, the normal supporting mods like injectors and fuel.

Quote:

Originally Posted by thatdavidkid

if i'm not mistaken... isn't the bullit throttle body very similar to the 4v?

Yes Sir. Same as the Cobra one.

Naz

Nazman · 12-19-2007, 12:01 PM

Nazman · 12-31-2007, 09:28 PM

PENDING SALE!

12-13-2007, 10:15 PM	#1
Nazman WMD Join Date: Jan 2005 Location: San Antonio, TX Posts: 165 Trader Rating: (0)	Hellion BBT76 Turbo Kit, 1200 Miles! This is for a 99-04 Cobra or Mach 1. Could work for a 99-04 GT with a diferent intake pipe. This kit have been up-graded to the T76 with Ceramic Ball Bearing option, all the Cold and Hot side have been ceramic coated (over 1K invested in coatings). This is what you get: Hellion BBT76 Turbo Kit -CBB Turbonetics T76 .96AR -All Hot Side Ceramic Coated Black (2000F), from exhaust manifolds to CB Y Pipe (manifolds included) -All Cold Side Ceramic Coated "Silver" (1000F) -Turbonetics Evolution Waste Gate, with SS independent tubing for atmosphere venting -XS Racer By-pass valve -Complete Bolt-on Manual Boost Controller Included! Less than 1200 miles!!!! Complete Hellion T76: $5000.00 Please, Serious Inquiries Only PM or email at Stang32v@yahoo.com __________________ Old Combo: 10.79@128.92MPH All Motor, 3350LBS 9.88@143.62MPH On Nitrous "Dont Mess with Texas!"

12-13-2007, 10:43 PM	#2
Lethal Performance LSS Sponsor Join Date: Jun 2007 Location: SA,TX Posts: 361 Trader Rating: (1)	TTT Saw this kit make close to 700 rwhp. __________________ www.lethalperformancesatx.com New website Dyno Tuning with: Hp tuners,SCT,Diablo and LT1 edit Email us at lethalperformance@yahoo.com. We will get back with you Open Tuesday thru Friday 9:00am to 6:30pm Saturday's by appointment only

12-13-2007, 11:04 PM	#3
ANRmotorsports LSS Sponsor Join Date: Apr 2005 Location: FOX BODY KING Posts: 699 Trader Rating: (10)	Nice kit... BTW this is Robert with the SRT8 and SRT10!!! __________________ ANRmotorsports 7190 E.1518 N. Schertz, TX 78154 New and Used mustang parts.

12-14-2007, 06:18 PM	#8
racer99 Box Foxes Rule!!! Join Date: Feb 2005 Location: San Antonio TX Posts: 1,356 Trader Rating: (1)	Naz,Whats next? __________________ Never underestimate the unpredictability of stupidity! 78 Zephyr, 82 Granada Wagon, 88 Mustang 2.3T 94 GT

12-15-2007, 09:09 AM	#10
racer99 Box Foxes Rule!!! Join Date: Feb 2005 Location: San Antonio TX Posts: 1,356 Trader Rating: (1)	Back to the spray,Naz and I talked about that when I bought the wheels from him. __________________ Never underestimate the unpredictability of stupidity! 78 Zephyr, 82 Granada Wagon, 88 Mustang 2.3T 94 GT

12-14-2007, 12:23 AM	#5
ChrisGT2000 Registered User Join Date: Apr 2007 Location: san antonio Posts: 855 Trader Rating: (5)	yep I saw one on youtube going down the track damn thing sounded like a jet.

12-15-2007, 10:50 AM	#11
Nazman WMD Join Date: Jan 2005 Location: San Antonio, TX Posts: 165 Trader Rating: (0)	Available!!!!!!!! Come Get It! __________________ Old Combo: 10.79@128.92MPH All Motor, 3350LBS 9.88@143.62MPH On Nitrous "Dont Mess with Texas!"

12-15-2007, 11:03 AM	#12
psiperformance LSS Sponsor Join Date: Mar 2006 Posts: 869 Trader Rating: (1)	kits very clean have seen it on our dyno __________________ PSI Performance Solutions 210-655-6546 10811 nacogdoches road San Antonio TX 78217 cmr tuners and full service performance shop.

12-15-2007, 11:13 AM	#13
Nazman WMD Join Date: Jan 2005 Location: San Antonio, TX Posts: 165 Trader Rating: (0)	Here are a few pics..... Turbo: Intercooler: -Ceramic Coated with Thermal Dispersant (Black) Turbonetics "Evolution" BOV -Moded to vent to atmosphere (all 304 Stainless tubing and TIG Welded) -2 Springs (7LBS & 9LBS) as well as Shims (all shims 5 shims brings 11 PSI) Turbo X/S Race By-Pass Valve -5 Shims included Ceramic Coated Hot Piping Black (2000F) Come get it! __________________ Old Combo: 10.79@128.92MPH All Motor, 3350LBS 9.88@143.62MPH On Nitrous "Dont Mess with Texas!"

12-15-2007, 12:12 PM	#15
lazer96gt LSS Sponsor Join Date: Mar 2006 Location: San Antonio Posts: 1,491 Trader Rating: (6)	I've seen this car in action and that Turbo (and car) is an animal. good luck with the sale. __________________ 96 SVT#6858 of 7496 http://videos.streetfire.net/video/9...bra_193899.htm Click the link below. Inventory updated regularly. http://www.autotrader.com/dealers/dd...um_records=100 210-658-6296 or call toll free 1-866-221-1190

12-15-2007, 07:12 PM	#16
TonyToughNuts Ya know.....What had happened was....... Join Date: Dec 2007 Location: Ft. Hood Posts: 233 Trader Rating: (0)	besides forged internals, what mods would it take to make that work on a 2v? __________________ you laugh cause it's funny, i laugh cause it's true

12-15-2007, 08:41 PM	#17
thatdavidkid looks mean, workin' on the fast Join Date: Oct 2006 Location: Denton Posts: 3,878 Trader Rating: (1)	if i'm not mistaken... isn't the bullit throttle body very similar to the 4v? __________________ 1991 lx coupe t-5 swap, billit quadrant, upr firewall adjuster, steeda tri-ax, custom jb tool and fab one off subframe connectors, 8.8 w/posi and 4.10's with 5 lug axles, tubular upper control arms, southside lowers, and pbr twin piston front calipers with "snowflake" wheels

12-19-2007, 12:01 PM	#19
Nazman WMD Join Date: Jan 2005 Location: San Antonio, TX Posts: 165 Trader Rating: (0)	TTT __________________ Old Combo: 10.79@128.92MPH All Motor, 3350LBS 9.88@143.62MPH On Nitrous "Dont Mess with Texas!"

12-31-2007, 09:28 PM	#20
Nazman WMD Join Date: Jan 2005 Location: San Antonio, TX Posts: 165 Trader Rating: (0)	PENDING SALE! __________________ Old Combo: 10.79@128.92MPH All Motor, 3350LBS 9.88@143.62MPH On Nitrous "Dont Mess with Texas!"

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: