Machine Shop Recommendations

**AdRock** · 11-21-2005, 05:18 PM

I want to get the pressure plate and aluminum flywheel balanced together before I install the new setup on the car. I know of several machine shops in town but I thought I'd get some opinions and see if anybody might know somebody.

I worked at Howard Campbell at one point in time. I wouldn't let them do anything if they're still around. So anywhere but there.

rambozotheclown · 11-21-2005, 05:49 PM

howard campbell closed down a few years back

ive got my block and heads from the camaro at Miller's Machine off Grissom.. friend from Olds club sent me there, has been dealin with em for >20yrs
684-7722

**AdRock** · 11-21-2005, 06:00 PM

Quote:

Originally Posted by rambozotheclown

howard campbell closed down a few years back

I figured they would have. They put out some crap. I got bitched out for doing too thorough of a job on the blocks when I was there.

**PonyTx** · 11-21-2005, 06:15 PM

What about Kendrick's? 210-337-0838.

Mach1NV · 11-21-2005, 08:28 PM

Kotzer, talk to Pete 590-1540.

**AdRock** · 11-21-2005, 11:36 PM

Quote:

Originally Posted by Mach1NV

Kotzer, talk to Pete 590-1540.

And who should I say referred me if I call? I'll always give someone credit for hooking me up.

**12second5.0** · 11-22-2005, 09:41 AM

I have always dealt with Mission.The Hamilton boys know their stuff.

I3oostedCubes · 11-22-2005, 03:09 PM

Never heard anything bad about Duffin Machine Shop.

Mach1NV · 11-22-2005, 03:17 PM

Duffin is horrible, we at work used them on a couple of long blocks and needless to say I will never use or refer them again

86drop · 11-29-2005, 12:27 AM

on the same note, what about building a long block including all the necessary machine work?

11-21-2005, 05:18 PM	#1
AdRock If you hate me, then read my sig Join Date: Nov 2003 Location: On The Move Posts: 5,397 Trader Rating: (5)	Machine Shop Recommendations I want to get the pressure plate and aluminum flywheel balanced together before I install the new setup on the car. I know of several machine shops in town but I thought I'd get some opinions and see if anybody might know somebody. I worked at Howard Campbell at one point in time. I wouldn't let them do anything if they're still around. So anywhere but there. __________________ '02 Stang GT Just cause you don't understand what's going on ...don't mean it don't make no sense And just cause you don't like it,...don't mean it aint no good And let me tell you something Before you go taking a walk in my world,...you better take a look at the real world Cause this aint no Mr. Rogers Neighborhood Can you say "feel like shit?"Yea maybe sometimes I do feel like shit I aint happy about it, but I'd rather feel like shit than be full of shit! And if I offended you, Oh I'm sorry, But, maybe you need to be offended But here's my apology and one more thing........Fuck you! Cause you can't bring me down

11-21-2005, 05:49 PM	#2
rambozotheclown you just don't know! Join Date: Aug 2004 Location: San Antonio, TX Posts: 4,029 Trader Rating: (0)	howard campbell closed down a few years back ive got my block and heads from the camaro at Miller's Machine off Grissom.. friend from Olds club sent me there, has been dealin with em for >20yrs 684-7722 __________________ If you support the policies and character of John McCain, please drive with your headlights on during the day. If you support Barack Obama, please drive with your headlights off at night.

11-22-2005, 09:41 AM	#7
12second5.0 Sie lieben, mich zu hassen! Join Date: Jun 2003 Location: Marion,Texas Posts: 9,006 Trader Rating: (0)	I have always dealt with Mission.The Hamilton boys know their stuff. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

11-21-2005, 06:15 PM	#4
PonyTx Lookin' California, Feelin' Minnesota Join Date: Jul 2005 Location: San Antonio Posts: 6,356 Trader Rating: (0)	What about Kendrick's? 210-337-0838.

11-21-2005, 08:28 PM	#5
Mach1NV Registered User Join Date: Jul 2005 Location: San Anto Posts: 110 Trader Rating: (0)	Kotzer, talk to Pete 590-1540.

11-22-2005, 03:09 PM	#8
I3oostedCubes Registered User Join Date: Oct 2004 Location: San Antonio Posts: 379 Trader Rating: (0)	Never heard anything bad about Duffin Machine Shop.

11-22-2005, 03:17 PM	#9
Mach1NV Registered User Join Date: Jul 2005 Location: San Anto Posts: 110 Trader Rating: (0)	Duffin is horrible, we at work used them on a couple of long blocks and needless to say I will never use or refer them again

11-29-2005, 12:27 AM	#10
86drop Registered User Join Date: Sep 2003 Location: san antonio Posts: 260 Trader Rating: (0)	on the same note, what about building a long block including all the necessary machine work?