Midnight Madness - Page 2

96greengt · 06-20-2007, 11:54 PM

Blower, hair dryer, super charger............................ can of whoop ass, what's the difference???

It's all FI...... lol

VeronicaGT · 06-21-2007, 12:05 AM

Duplicate-Opps!

VeronicaGT · 06-21-2007, 12:06 AM

#22
VeronicaGT
Vero

Join Date: Feb 2007
Location: San Antonio
Posts: 12
My best was 12.49 Angel Padilla went 11.80
302 turned 306 ported dart heads
Cant remember the make of the rocker arms
vortec v1 smaller blower but we cheated by adding smaller pullies making 10 lbs boost
MSD everything, ignigtion, bigger started, ford racing wires
UPR upper and lowers springs
Eibach drag launch kit
KYB Shocks
Lakewood 70/30 struts
dual electic fan
maximum motorsport caster cambers
no ac, no heater
t5, pro 5.0 shifter
subframe connectors
flaming river drive shaft
up graded this week to 10 inch weld rims
HUGH CAM! Cant remember the make right now...weird...??
31 spline axles -also done this past week.
42 lb injectors
king cobra clutch, also upgrading this week not sure which one angel is using
skinnys in the front, street slicks in the back
battery relocated to the back
Cobra intake
BBK 65 trottle body
Bigger power pipe-UPR
steel braded brake lines
New rotors and brakes

thunderchicken · 06-21-2007, 12:09 AM

Quote:

Originally Posted by VeronicaGT

No silly I have a super charger he's just messing with me.

Oh.....ok

thunderchicken · 06-21-2007, 12:10 AM

Quote:

Originally Posted by VeronicaGT

My best was 12.49 Angel Padilla went 11.80
302 turned 306 ported dart heads
Cant remember the make of the rocker arms
vortec v1 smaller blower but we cheated by adding smaller pullies making 10 lbs boost
MSD everything, ignigtion, bigger started, ford racing wires
UPR upper and lowers springs
Eibach drag launch kit
KYB Shocks
Lakewood 70/30 struts
dual electic fan
maximum motorsport caster cambers
no ac, no heater
t5, pro 5.0 shifter
subframe connectors
flaming river drive shaft
up graded this week to 10 inch weld rims
HUGH CAM! Cant remember the make right now...weird...??
31 spline axles -also done this past week.
42 lb injectors
king cobra clutch, also upgrading this week not sure which one angel is using
skinnys in the front, street slicks in the back
battery relocated to the back
Cobra intake
BBK 65 trottle body
Bigger power pipe-UPR
steel braded brake lines
New rotors and brakes

Wow impressive....

VeronicaGT · 06-21-2007, 12:11 AM

I tried to post it but it didnt go...I'm not sure...

thunderchicken · 06-21-2007, 12:11 AM

Quote:

Originally Posted by VeronicaGT

#22
VeronicaGT
Vero

Join Date: Feb 2007
Location: San Antonio
Posts: 12
My best was 12.49 Angel Padilla went 11.80
302 turned 306 ported dart heads
Cant remember the make of the rocker arms
vortec v1 smaller blower but we cheated by adding smaller pullies making 10 lbs boost
MSD everything, ignigtion, bigger started, ford racing wires
UPR upper and lowers springs
Eibach drag launch kit
KYB Shocks
Lakewood 70/30 struts
dual electic fan
maximum motorsport caster cambers
no ac, no heater
t5, pro 5.0 shifter
subframe connectors
flaming river drive shaft
up graded this week to 10 inch weld rims
HUGH CAM! Cant remember the make right now...weird...??
31 spline axles -also done this past week.
42 lb injectors
king cobra clutch, also upgrading this week not sure which one angel is using
skinnys in the front, street slicks in the back
battery relocated to the back
Cobra intake
BBK 65 trottle body
Bigger power pipe-UPR
steel braded brake lines
New rotors and brakes

And equally impressive

VeronicaGT · 06-21-2007, 12:12 AM

Thats the first time I actually tried to think about what I have, now I'm confused. Any way, hope to see some Lonestarstangs out there. Good night.

VeronicaGT · 06-21-2007, 12:15 AM

Green GT with tan top? Hot rod store sticker?

thunderchicken · 06-21-2007, 12:17 AM

Quote:

Originally Posted by VeronicaGT

Green GT with tan top? Hot rod store sticker?

Alright then good night....

FnSweet06 · 06-21-2007, 12:31 AM

Quote:

Originally Posted by VeronicaGT

#22
VeronicaGT
Vero

Join Date: Feb 2007
Location: San Antonio
Posts: 12
My best was 12.49 Angel Padilla went 11.80
302 turned 306 ported dart heads
Cant remember the make of the rocker arms
vortec v1 smaller blower but we cheated by adding smaller pullies making 10 lbs boost
MSD everything, ignigtion, bigger started, ford racing wires
UPR upper and lowers springs
Eibach drag launch kit
KYB Shocks
Lakewood 70/30 struts
dual electic fan
maximum motorsport caster cambers
no ac, no heater
t5, pro 5.0 shifter
subframe connectors
flaming river drive shaft
up graded this week to 10 inch weld rims
HUGH CAM! Cant remember the make right now...weird...??
31 spline axles -also done this past week.
42 lb injectors
king cobra clutch, also upgrading this week not sure which one angel is using
skinnys in the front, street slicks in the back
battery relocated to the back
Cobra intake
BBK 65 trottle body
Bigger power pipe-UPR
steel braded brake lines
New rotors and brakes

wow you have 12post....how much hp did that add to the engine

j/k

im adrian ...i was w/ mike c. and his white fox couple biff's ago. i was in the slow blk stang, polished wheels

thatdavidkid · 06-22-2007, 08:05 AM

i MIGHT head out friday after work.. but probably not.. have to be back at work at 5am sunday

VeronicaGT · 06-22-2007, 11:47 AM

Oh ok, cool. It was nice to meet you. Are you going to Franks BBQ on Sunday?

**psiperformance** · 06-22-2007, 12:05 PM

i have free tshirts for anyone who will wear it to midnight madness

white .. with dollars ign on the back and the words pay dean in red.

and a red circle with a line through it and the word freddy inside it on the left breast.

just a lil protest over the 36 thousand dollar loan i made the clash of the titans that it refuses to pay back.

so they are FREE to anyone who will wear it.

96greengt · 06-22-2007, 01:40 PM

Oh... a shammy to dry my car with...

vertcobra99 · 06-22-2007, 01:53 PM

Quote:

Originally Posted by VeronicaGT

Green GT with tan top? Hot rod store sticker?

you talking about me???? i have a cobra with a vortech

coupe5oh · 06-22-2007, 02:16 PM

Quote:

Originally Posted by VeronicaGT

#22
no ac, no heater

Doht!
Damn I hate that mod.

Mustangs are fast after being gutted.
I truly belive my car gutted, would run low 12's withOUT a blower.

Hey dean I'll wear one if you promise I wont get kicked out,

go ahead and have a T made for my 3 yr old nephew, lmao! cuz he's gonna be with me if I go.

FnSweet06 · 06-22-2007, 02:32 PM

Quote:

Originally Posted by VeronicaGT

Oh ok, cool. It was nice to meet you. Are you going to Franks BBQ on Sunday?

um i dunno yet...we might go tubing sat....your more then welcome to come along

**psiperformance** · 06-22-2007, 02:40 PM

Quote:

Originally Posted by 96greengt

Oh... a shammy to dry my car with...

we know that pile would fall apart if you washed it

you go loan some one 36 grand then have them refuse to pay you and see how you feel about it.

jmblownws6 · 06-22-2007, 02:47 PM

I might be out there with a new toy!

06-20-2007, 11:54 PM	#21
96greengt LOL @ your mom Join Date: Feb 2007 Location: N.E. SA Posts: 8,696 Trader Rating: (22)	Blower, hair dryer, super charger............................ can of whoop ass, what's the difference??? It's all FI...... lol __________________ Built 00 Windsor engine, .20 over, 11.6:1cr, fully ported heads, Hardballer intake w/cooling mod, Scat rods, Probe pistons, Cobra crank, tri-metal Clevite race bearings, VT Stage 2 N/A cams, adjustable cam gears, Canton windage tray, MMR oil pump, Cobra pick up, 75MM Accufab t-body, Dragon plenum, JLT CAI, 24# injectors, Bassani mid lengths, mufflers & O/R X,255lph fuel pump, BBK FPR, Fidanza aluminum flywheel, AJE K-member, ARP hardware everywhere, X-Cal SCT custom tuned, 3.73's, Pro 5.0, polygraphite motor mounts, over 300+ RWHP & 320+ TQ

06-22-2007, 08:05 AM	#32
thatdavidkid looks mean, workin' on the fast Join Date: Oct 2006 Location: Denton Posts: 3,903 Trader Rating: (1)	i MIGHT head out friday after work.. but probably not.. have to be back at work at 5am sunday __________________ 1991 lx coupe t-5 swap, billit quadrant, upr firewall adjuster, steeda tri-ax, custom jb tool and fab one off subframe connectors, 8.8 w/posi and 4.10's with 5 lug axles, tubular upper control arms, southside lowers, and pbr twin piston front calipers with "snowflake" wheels

06-22-2007, 12:05 PM	#34
psiperformance LSS Sponsor Join Date: Mar 2006 Posts: 876 Trader Rating: (1)	i have free tshirts for anyone who will wear it to midnight madness white .. with dollars ign on the back and the words pay dean in red. and a red circle with a line through it and the word freddy inside it on the left breast. just a lil protest over the 36 thousand dollar loan i made the clash of the titans that it refuses to pay back. so they are FREE to anyone who will wear it. __________________ PSI Performance Solutions 210-655-6546 10811 nacogdoches road San Antonio TX 78217 cmr tuners and full service performance shop.

06-22-2007, 01:40 PM	#35
96greengt LOL @ your mom Join Date: Feb 2007 Location: N.E. SA Posts: 8,696 Trader Rating: (22)	Oh... a shammy to dry my car with... __________________ Built 00 Windsor engine, .20 over, 11.6:1cr, fully ported heads, Hardballer intake w/cooling mod, Scat rods, Probe pistons, Cobra crank, tri-metal Clevite race bearings, VT Stage 2 N/A cams, adjustable cam gears, Canton windage tray, MMR oil pump, Cobra pick up, 75MM Accufab t-body, Dragon plenum, JLT CAI, 24# injectors, Bassani mid lengths, mufflers & O/R X,255lph fuel pump, BBK FPR, Fidanza aluminum flywheel, AJE K-member, ARP hardware everywhere, X-Cal SCT custom tuned, 3.73's, Pro 5.0, polygraphite motor mounts, over 300+ RWHP & 320+ TQ

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

06-21-2007, 12:05 AM	#22
VeronicaGT Vero Join Date: Feb 2007 Location: San Antonio Posts: 22 Trader Rating: (0)	Duplicate-Opps! Last edited by VeronicaGT; 06-21-2007 at 12:13 AM.

06-21-2007, 12:06 AM	#23
VeronicaGT Vero Join Date: Feb 2007 Location: San Antonio Posts: 22 Trader Rating: (0)	#22 VeronicaGT Vero Join Date: Feb 2007 Location: San Antonio Posts: 12 My best was 12.49 Angel Padilla went 11.80 302 turned 306 ported dart heads Cant remember the make of the rocker arms vortec v1 smaller blower but we cheated by adding smaller pullies making 10 lbs boost MSD everything, ignigtion, bigger started, ford racing wires UPR upper and lowers springs Eibach drag launch kit KYB Shocks Lakewood 70/30 struts dual electic fan maximum motorsport caster cambers no ac, no heater t5, pro 5.0 shifter subframe connectors flaming river drive shaft up graded this week to 10 inch weld rims HUGH CAM! Cant remember the make right now...weird...?? 31 spline axles -also done this past week. 42 lb injectors king cobra clutch, also upgrading this week not sure which one angel is using skinnys in the front, street slicks in the back battery relocated to the back Cobra intake BBK 65 trottle body Bigger power pipe-UPR steel braded brake lines New rotors and brakes

06-21-2007, 12:11 AM	#26
VeronicaGT Vero Join Date: Feb 2007 Location: San Antonio Posts: 22 Trader Rating: (0)	I tried to post it but it didnt go...I'm not sure...

06-21-2007, 12:12 AM	#28
VeronicaGT Vero Join Date: Feb 2007 Location: San Antonio Posts: 22 Trader Rating: (0)	Thats the first time I actually tried to think about what I have, now I'm confused. Any way, hope to see some Lonestarstangs out there. Good night.

06-21-2007, 12:15 AM	#29
VeronicaGT Vero Join Date: Feb 2007 Location: San Antonio Posts: 22 Trader Rating: (0)	Green GT with tan top? Hot rod store sticker?

06-22-2007, 11:47 AM	#33
VeronicaGT Vero Join Date: Feb 2007 Location: San Antonio Posts: 22 Trader Rating: (0)	Oh ok, cool. It was nice to meet you. Are you going to Franks BBQ on Sunday?

06-22-2007, 02:47 PM	#40
jmblownws6 96greengt does great bubble gum intakes! LOL! Join Date: May 2007 Location: New Braunfels Posts: 307 Trader Rating: (0)	I might be out there with a new toy!