Need a tremec 3650 and or clutch

no cigar · 03-05-2008, 08:14 AM

Hey fellas I need a good 3650 for my 01 Cobra for not too much coin. I possibly blew it up last night. Also I need a good clutch with throw out bearing. In or around San Marcos would be preferable. Call me @ 512-922-8042 Brandon

**thesource** · 03-05-2008, 08:35 AM

If you can't find something used on the T3650 , let me know . I can rebuild it but its not going to be cheap . Those damn parts are high dollar for the T3650 units .

machgsxr · 03-05-2008, 09:11 AM

I have one, but it has a bad 3rd gear syncro. All other gears worked fine, you just had to work it to get it to go into third.

Im going to Austing Friday night as well so I can deliver it if needed.

**thesource** · 03-05-2008, 09:22 AM

Thats the most common issue with them but I have seen a few lately that were a lot worse off too .

rxracer · 03-05-2008, 11:46 AM

i have one from a 'wrecked 04 mach 1 for $700. comes with trans, t/o bearing, clutch, p/p, MGW shifter, clutch cable, and flywheel. supposedly had 65,000 miles, and was working fine. a mechanic wrecked the car after doing a tune up.

no cigar · 03-05-2008, 10:03 PM

Quote:

Originally Posted by machgsxr

I have one, but it has a bad 3rd gear syncro. All other gears worked fine, you just had to work it to get it to go into third.

Im going to Austing Friday night as well so I can deliver it if needed.

You have a PM

no cigar · 03-12-2008, 01:26 PM

Hey fellas, I got it taken care of, sorry for the late notice.

Archie, you are a life saver man! Thanks a LOT! Also, no problem about not being there to load it - but tell your sister thanks again for helping me out.

machgsxr · 03-12-2008, 02:45 PM

Quote:

Originally Posted by no cigar

Hey fellas, I got it taken care of, sorry for the late notice.

Archie, you are a life saver man! Thanks a LOT! Also, no problem about not being there to load it - but tell your sister thanks again for helping me out.

Cool. Will do.

You get your car back to C.c. alright?

no cigar · 03-12-2008, 03:19 PM

Sure did. Even with that synchro it shifts smooth and runs great. Thinking about rebuilding it because it has the .62 o/d... Mine had the .68.

RedIceATX · 03-18-2008, 10:16 AM

Quote:

Originally Posted by thesource

Thats the most common issue with them but I have seen a few lately that were a lot worse off too .

Yeah, I am on my 2nd one and that happened on the first tranny as well as this one.

Can you PM me the cost on parts for that?

03-05-2008, 08:14 AM	#1
no cigar Registered User Join Date: Aug 2005 Posts: 96 Trader Rating: (1)	Need a tremec 3650 and or clutch Hey fellas I need a good 3650 for my 01 Cobra for not too much coin. I possibly blew it up last night. Also I need a good clutch with throw out bearing. In or around San Marcos would be preferable. Call me @ 512-922-8042 Brandon

03-05-2008, 08:35 AM	#2
thesource LSS Sponsor Join Date: Nov 2004 Location: in a hole building transmissions Posts: 3,138 Trader Rating: (12)	If you can't find something used on the T3650 , let me know . I can rebuild it but its not going to be cheap . Those damn parts are high dollar for the T3650 units . __________________ Texas Motorsports Myspace Texas Motorsports Photobucket

03-05-2008, 09:22 AM	#4
thesource LSS Sponsor Join Date: Nov 2004 Location: in a hole building transmissions Posts: 3,138 Trader Rating: (12)	Thats the most common issue with them but I have seen a few lately that were a lot worse off too . __________________ Texas Motorsports Myspace Texas Motorsports Photobucket

03-05-2008, 11:46 AM	#5
rxracer Registered User Join Date: Jan 2005 Location: houston Posts: 111 Trader Rating: (0)	i have one from a 'wrecked 04 mach 1 for $700. comes with trans, t/o bearing, clutch, p/p, MGW shifter, clutch cable, and flywheel. supposedly had 65,000 miles, and was working fine. a mechanic wrecked the car after doing a tune up. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

03-05-2008, 09:11 AM	#3
machgsxr speed-olic Join Date: Mar 2007 Location: San Antonio Posts: 943 Trader Rating: (7)	I have one, but it has a bad 3rd gear syncro. All other gears worked fine, you just had to work it to get it to go into third. Im going to Austing Friday night as well so I can deliver it if needed.

03-12-2008, 01:26 PM	#7
no cigar Registered User Join Date: Aug 2005 Posts: 96 Trader Rating: (1)	Hey fellas, I got it taken care of, sorry for the late notice. Archie, you are a life saver man! Thanks a LOT! Also, no problem about not being there to load it - but tell your sister thanks again for helping me out.

03-12-2008, 03:19 PM	#9
no cigar Registered User Join Date: Aug 2005 Posts: 96 Trader Rating: (1)	Sure did. Even with that synchro it shifts smooth and runs great. Thinking about rebuilding it because it has the .62 o/d... Mine had the .68.