11-09-2007, 11:39 PM
|
#1 | |
|
Hates Liberal Scum
 
|
New Best
new best in the cobra tonight finally dipped into the 13's with a 13.71@102.79 with a 2.05 60ft
not bad, but not great, considering the shocks and struts are blown, and the car was a full weight 3675lbs on 18" street tires and the car only has exhaust and 4.10's next batch of mods are gonna be shocks/struts, brakes, get my SFC's installed, and take out my sub and spare tire edit: i counted my slips and i managed to get 14 runs in
__________________
<><'97 Rio Red Cobra #2637 of 6961 Modded-274.47RWHP/271.40 RWTQ<><  http://www.lonestarstangs.com/forum/auto-detailing-services-40031.html Quote:
Last edited by timpryor; 11-10-2007 at 12:18 AM. |
|
|
|
|
11-10-2007, 08:20 AM
|
#2 | |
|
Sandbagger
|
Quote:
 Keep chipping away at those times. A few mods and some more seat time and you will be into the 12s! TJ
__________________
Dyno sheets and trailer queens don't impress me. Timeslips and drivers do! |
|
|
|
|
|
11-10-2007, 03:15 PM
|
#3 |
|
Three-hundredths of a second away from it!!!!
|
Damn with just gears and exhaust, Shit my next buy is a cobra!
__________________
2002 Mustang GT-K&N FIPK, Accufab Plenum/ 75mm T-body, Diablosport Predator, 4.10s, Pro 5.0 shifter, Bassani O/r x-pipe, Magnaflow Magnapacks, Steeda pulleys, Mickey Thompson ET streets, Moser axles, Eibach Sportlines, Hotchkis U/Lca's, 180* t-stat_ best e.t 13.02@103!!!! 
|
|
|
|
|
11-10-2007, 07:05 PM
|
#4 | |
|
Hates Liberal Scum
|
^and to think that not really where my car should be either
__________________
<><'97 Rio Red Cobra #2637 of 6961 Modded-274.47RWHP/271.40 RWTQ<>< http://www.lonestarstangs.com/forum/auto-detailing-services-40031.html Quote:
|
|
|
|
|
|
11-10-2007, 10:20 PM
|
#6 | |||
|
I eated it..
|
Quote:
__________________
Quote:
Quote:
Built 00 Windsor engine, .20 over, 11.6:1cr, fully ported heads, Hardballer intake w/cooling mod, Scat rods, Probe pistons, Cobra crank, tri-metal Clevite race bearings, VT Stage 2 N/A cams, adjustable cam gears, Canton windage tray, MMR oil pump, Cobra pick up, 75MM Accufab t-body, Dragon plenum, JLT CAI, 24# injectors, Bassani mid lengths, mufflers & O/R X,255lph fuel pump, BBK FPR, Fidanza aluminum flywheel, AJE K-member, ARP hardware everywhere, X-Cal SCT custom tuned, 3.73's, Pro 5.0, polygraphite motor mounts. |
|||
|
|
|
|
11-10-2007, 10:33 PM
|
#7 | |
|
Hates Liberal Scum
|
+e typed it right he just drives like a grandma
hehehe jk john
__________________
<><'97 Rio Red Cobra #2637 of 6961 Modded-274.47RWHP/271.40 RWTQ<>< http://www.lonestarstangs.com/forum/auto-detailing-services-40031.html Quote:
|
|
|
|
|
|
11-11-2007, 02:33 AM
|
#9 |
|
Three-hundredths of a second away from it!!!!
|
damn i hit a 13.7 as well with a K&N fipk and exhaust, but now i have a few more things ( in my sig ) and should be hittin the track the 23rd, so hopefully ill hit a mid 13........hopefully! people say i should do better but i dont wanna get my hopes up.
__________________
2002 Mustang GT-K&N FIPK, Accufab Plenum/ 75mm T-body, Diablosport Predator, 4.10s, Pro 5.0 shifter, Bassani O/r x-pipe, Magnaflow Magnapacks, Steeda pulleys, Mickey Thompson ET streets, Moser axles, Eibach Sportlines, Hotchkis U/Lca's, 180* t-stat_ best e.t 13.02@103!!!!
|
|
|
|
|
11-11-2007, 04:05 PM
|
#10 |
|
☆★sSs★☆
|
thats pretty good timmy...woulda been good run w/ the slow termi i seen run last nite...he ran like a 13.4 ...so yeah thats pretty good for a non s/c cobra with few mod's
__________________
06' Tungsten Grey GT |
|
|
|
11-12-2007, 09:25 PM
|
#12 | |
|
Hates Liberal Scum
|
and got my ass handed to me by a 10 second car.
you should come out wednesday TJ
__________________
<><'97 Rio Red Cobra #2637 of 6961 Modded-274.47RWHP/271.40 RWTQ<>< http://www.lonestarstangs.com/forum/auto-detailing-services-40031.html Quote:
|
|
|
|
|
|
11-14-2007, 01:26 PM
|
#13 | |||
|
I eated it..
|
Quote:
__________________
Quote:
Quote:
Built 00 Windsor engine, .20 over, 11.6:1cr, fully ported heads, Hardballer intake w/cooling mod, Scat rods, Probe pistons, Cobra crank, tri-metal Clevite race bearings, VT Stage 2 N/A cams, adjustable cam gears, Canton windage tray, MMR oil pump, Cobra pick up, 75MM Accufab t-body, Dragon plenum, JLT CAI, 24# injectors, Bassani mid lengths, mufflers & O/R X,255lph fuel pump, BBK FPR, Fidanza aluminum flywheel, AJE K-member, ARP hardware everywhere, X-Cal SCT custom tuned, 3.73's, Pro 5.0, polygraphite motor mounts. |
|||
|
|
|
|
11-14-2007, 02:18 PM
|
#14 | |
|
Hates Liberal Scum
|
^bastard
__________________
<><'97 Rio Red Cobra #2637 of 6961 Modded-274.47RWHP/271.40 RWTQ<>< http://www.lonestarstangs.com/forum/auto-detailing-services-40031.html Quote:
|
|
|
|
|
|
11-14-2007, 02:22 PM
|
#15 | |
|
Registered User
|
Quote:
|
|
|
|
|
|
11-14-2007, 06:06 PM
|
#16 | |||
|
I eated it..
|
Quote:
__________________
Quote:
Quote:
Built 00 Windsor engine, .20 over, 11.6:1cr, fully ported heads, Hardballer intake w/cooling mod, Scat rods, Probe pistons, Cobra crank, tri-metal Clevite race bearings, VT Stage 2 N/A cams, adjustable cam gears, Canton windage tray, MMR oil pump, Cobra pick up, 75MM Accufab t-body, Dragon plenum, JLT CAI, 24# injectors, Bassani mid lengths, mufflers & O/R X,255lph fuel pump, BBK FPR, Fidanza aluminum flywheel, AJE K-member, ARP hardware everywhere, X-Cal SCT custom tuned, 3.73's, Pro 5.0, polygraphite motor mounts. |
|||
|
|
|
 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
