|
|
#1 |
|
Registered User
|
I don't mean to sound like a jerk but a month or two back i took my bullitt to nighthawk to have him replace my exhaust. While there, the tailpipe would not fit over the exhaust pipe so we forced it on until i could take it somewhere els to get it fit on there right. Today when i took it to Corvette Country in Austin to have it fixed (have a great mechanic there). Well when we got the car on the lift and looked at it... it looked like a totally shitty job had been done. Some bolts and screws were not even there and the ones that were there were so loose i undid them by hand!!! The muffler brackets were facing down(common sense you are supposed to face the brackets to the side so if they ever get hit your mufflers don't fall out)!!! The 02 sensors had been left hanging down and the catback system was so loose it practically fell of when we were removing it to fix the shoddy work that had been done. It cost me $120 to fix all the crap that was wrong with the installation of my exhaust. I'm sorry but I will never again use BS Performance! Looking at the shitty work that had been done on my exhaust has convinced me. For god's sake the day after the catback system was installed by nighthawk the hangars holding the tailpipes up fell off on the highway!!! So i'm out $120 and the money i wasted at BS Performance and nighthawk sorry but you will probably never recieve business from my family ever again. To think my father and sister were gonna take their stangs to BS performance to have gears put in.. yeah right. Thank goodness i told them to wait. Just letting ya'll know, oh and i don't mean to sound like an asshole, nothing against you personally nighthawk i just was extremely displeased with the quality of work done on my baby.
__________________
My Highland Green Bullitt has these mods: PERFORMANCE: Coming Soon: Lower ca's, Steeda udp's. FRPP 4.10 Gears MGW Short throw Mac Prochamber (Offroad of Coarse!) Xcalibrator 2 Tune Yokohama 275's (tires) K&N Filter VISUAL: 20% Window tint Custom Wheel "Bullitt" Centercaps Mach 1 Chin Spoiler Mach 1 Grill Delete 4.6 High Performance fender emblems 14" shorty antennae HID Headlight Kit Custom Bullitt Shiftknob Various Billet Accesories (besides the stock ones) Last edited by BlueThunder; 10-07-2005 at 03:55 PM. |
|
|
|
|
#2 |
|
Killing is my Business...And Business is Good!
![]() |
Well you pay for what you get in most cases. Sorry to hear about that.
__________________
![]() 1988 Mustang LX Last edited by bighoss88lx; 10-07-2005 at 04:33 PM. |
|
|
|
|
#5 |
|
technology > displacement
|
Since you must post this before contacting me about it, I guess I have to post to defend myself.
Everything was done like I've done 100 times before, everything was tightened as much as it needed to be. The mufflers were hung correctly and placed in their respective factory hangers. Anything having to do with the tailpipe was the sole fault of the manufacture of the exhaust system because it just didn't fit. You know that, so why try and put that on me? The hanger fell off because it wasn't it the right location because the tailpipe didn't fit. And if you just got it fixed now, I guess you've been driving around with no hanger for how many months? That's probably what lossened some of the bolts. The hanger is there for a reason and thats why I tried to mount it with what I had to work with. Not only that, but I spent TWO solid EXTRA hours working on the tailpipe to try to get it decent looking and fitting. I didn't need to spend that time to try and fix a manufacture defect. Did I charge you for those extra hours? No.
__________________
My Garage |
|
|
|
|
#6 | |
|
technology > displacement
|
Quote:
__________________
My Garage |
|
|
|
|
|
#7 | |
|
Killing is my Business...And Business is Good!
![]() |
Quote:
__________________
![]() 1988 Mustang LX |
|
|
|
|
|
#8 | |
|
If you hate me, then read my sig
|
Quote:
That's what my first thought was. Don't you talk to the person that did the work first if you're not happy with it. A also used to do side jobs at the shop after work so I also know how this stuff works. If somebody has a problem with any work I do I'd hope that they would let me know before going off about it in front of everybody. The person that does the work should at least get a chance to rectify the situation as a start.
__________________
'02 Stang GT Just cause you don't understand what's going on ...don't mean it don't make no sense And just cause you don't like it,...don't mean it aint no good And let me tell you something Before you go taking a walk in my world,...you better take a look at the real world Cause this aint no Mr. Rogers Neighborhood Can you say "feel like shit?"Yea maybe sometimes I do feel like shit I aint happy about it, but I'd rather feel like shit than be full of shit! And if I offended you, Oh I'm sorry, But, maybe you need to be offended But here's my apology and one more thing........Fuck you! Cause you can't bring me down |
|
|
|
|
|
#9 |
|
aka...BlackJack
|
I've seen Nighthawk do good work...
just my .02
__________________
![]() SCT, JLT, Pullies, Gears, 3000 stall, BMR LCA's, Steeda Superlites, O/R H, Mac Axlebacks and BAMACHIPS tuned!
|
|
|
|
|
#10 | |
|
I am back......
|
Quote:
Sorry you had a bad experince with BS.. But I have heard a few good things about him. did you try to let him know about it before you forked out more money to get it "fixed". You knew going there it was a side job so I would have atleast call the man to see what he could have done for you.. You would'nt just take your car to one shop pay them and not like the work then take it to another to pay them to do it right. I would have called him up first... Then I would have send this message in a PM just my thought...
__________________
|
|
|
|
|
|
#11 | |
|
Registered User
|
Quote:
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|