Noribilt

**Lucky** · 09-24-2009, 11:31 AM

I'm building my first car since moving from Louisiana, where I knew where to get anything done. Getting ready to get my LX mini tubbed and caged. Got sent to Noribilt, I talked to Mike and he seemed like a nice enough guy.

Thoughts on this shop? or anywhere else I should look?

Also looking for a transmission guy to change the tail shaft in a C-6. I don't need it rebuilt just swap the tail shaft. any ideas?

Thanks,

**90gt** · 09-24-2009, 11:37 AM

Mike @ Noribuilt is a great guy & he seems really know his shit, from what I have seen. I know he comes pretty highly recommended for chasis work & turbo stuff.

The C-6 stuff kinda depends on what side of town are you on?

**RaceRat** · 09-24-2009, 12:40 PM

If I was getting a cage, Mike is the only person I'd have do it. His welding is incredible.

**Lucky** · 09-24-2009, 04:13 PM

Sounds good to me... any good transmission guys?

**tpcobra95** · 09-24-2009, 07:01 PM

Mike is the schiznit, I get most of my work done there. I remember hearing about a tranny guy on the North side, I will try to get his name.

**Lucky** · 09-24-2009, 07:05 PM

Originally Posted by tpcobra95

Mike is the schiznit, I get most of my work done there. I remember hearing about a tranny guy on the North side, I will try to get his name.

cool, just need the tail shaft swapped out of a C-6. wish i needed a rebuild, since it's gotta come apart anyway.

**thesource** · 09-25-2009, 03:00 PM

I've heard nothing but good about Mike N.

**Lucky** · 09-30-2009, 02:31 PM

Mike dropped the price on me, about 4500 for cage and mini tub, installed... Soo.. anyone need a kidney? a white girl?

**machgsxr** · 09-30-2009, 03:30 PM

Originally Posted by Lucky

Mike dropped the price on me, about 4500 for cage and mini tub, installed... Soo.. anyone need a kidney? a white girl?

I got 20 bux for the white girl..

**tpcobra95** · 09-30-2009, 06:40 PM

Originally Posted by Lucky

Mike dropped the price on me, about 4500 for cage and mini tub, installed... Soo.. anyone need a kidney? a white girl?

mild steel or chromoly?

**Lucky** · 09-30-2009, 09:34 PM

Originally Posted by tpcobra95

mild steel or chromoly?

C/moly

**tpcobra95** · 10-01-2009, 08:32 AM

Do you plan on running faster than 8.50's?

**Chris@STP** · 10-01-2009, 10:16 AM

Mike is a good dude and does great work.

**OWNAGE** · 10-01-2009, 02:33 PM

Hands down Noribilt is the place to go for chassis and turbo work. You get what you pay for.

**TurboGA** · 10-03-2009, 12:00 AM

Originally Posted by machgsxr

I got 20 bux for the white girl..

I offer $25 for the white girl. Have not had one in many years.

**Boostaholic2184** · 10-05-2009, 10:01 PM

$30 for the white girl...pics of said female at once....good deal

**Racewife69** · 01-15-2010, 01:37 AM

Lucky you should also check out LRC Longoria race cars.
They did Al Castro's turbo stang lime time. along with many more.
They last time I was in there shop ther were building a nostalgia funny car, and were doing work on Mitch kings top fuel dragster. Here's there number 830 221 8673 ask for Greg Longoria he's really cool guy.

**1BigBad4d** · 01-15-2010, 04:07 AM

I've also heard and seen some of the work frm Greg Longoria he comes highly recommended frm some friends of mine who do chassis work as well. I would ck him out too!

**racer99** · 01-15-2010, 09:45 AM

Mr Leo and Greg do good work.

**tpcobra95** · 01-16-2010, 08:49 AM

You still can't go wrong with Noribilt. I don't think anybody else is going to be really cheaper than another. Unless they are doing the work out of their garage off their home.

**tulabeast** · 01-18-2010, 01:36 AM

norbilt for the win

**1BigBad4d** · 01-18-2010, 01:45 AM

You should go by LRC and check them out. Agree that norbilt is hard to pass up but LRC is a very good option. Go by their shop and talk to them. They are really good peeps.

Thread: Noribilt

Thread Tools

Rate This Thread

Display

Noribilt

Cage

Posting Permissions