online dyno

ChrisGT2000 · 10-26-2007, 01:19 AM

Speed Calculators, From RPM Outlet

Try this link if you have been to the track and know your trap speed and weight to see what kind of HP to wheels your doing.

FordGT08 · 10-31-2007, 11:21 AM

Quote:

Originally Posted by ChrisGT2000

Speed Calculators, From RPM Outlet

Try this link if you have been to the track and know your trap speed and weight to see what kind of HP to wheels your doing.

thats pretty cool man

95 GTS · 10-31-2007, 03:21 PM

342 rwhp for my estimate

4.6stanger · 10-31-2007, 05:03 PM

I guess its pretty cool, but then again its just a estimate (that was big time off for me)

**TrueBlueVenom** · 10-31-2007, 05:32 PM

did the reverse. i haven't weighed mine yet. i entered 3300 lbs. 353 HP

12.27 @ 111

timpryor · 10-31-2007, 05:39 PM

my weight and trap netted me 329 RWHP, but the real dyno said i've only got 274, however doing the reverse netted me a 100mph trap, and my real trap is 107

smlopez383 · 11-01-2007, 07:14 AM

625 hp but and 9.8 on the e.t
reality unknown on rwhp and 9.96@ 138 in the qtr

seco · 11-02-2007, 05:50 PM

interesting..... but I don't have a clue how much my 99 4.6L weighs. The stang has no weight loss mods....... anybody? average?

4.6stanger · 11-02-2007, 10:02 PM

3400....Maybe. LOL

Hmbre97 · 11-03-2007, 03:29 PM

Just for reference, my stock Mach 1 with no weight reduction mods weighed 3460 with half a tank of gas and no driver. I think an iron block 2V and an alum block 4V weigh about the same.

Agent Jones · 11-03-2007, 05:59 PM

That tool was dead on with my numbers......good find

FordGT08 · 11-06-2007, 11:28 AM

yeah its off a lot sometimes

**AdRock** · 11-07-2007, 12:33 AM

I did mine and it was off. 3400lbs w 100mph trap speed netted a calculation of 265hp at the wheels. Last dyno I only put down 239.

timpryor · 11-07-2007, 10:43 AM

^adam you were trapping higher than that though weren't you?

REDHOT86 · 02-24-2008, 04:16 PM

That was pretty much dead on for my car... at least the times and speeds it gave me... I'm not sure what my hp is for sure so I'm guessing that's pretty close to it. -JM

04Roush2 · 02-24-2008, 04:50 PM

I've used this tool before and I always get the same numbers. I entered my approximate weight and my exact RWHP and it put me at 11.74 @ 116 MPH

Agent Jones · 02-24-2008, 05:03 PM

Quote:

Originally Posted by 04Roush2

I've used this tool before and I always get the same numbers. I entered my approximate weight and my exact RWHP and it put me at 11.74 @ 116 MPH

is 11.74 close to what you run?

04Roush2 · 02-24-2008, 10:00 PM

Quote:

Originally Posted by Agent Jones

is 11.74 close to what you run?

I'm at 6,200 ft of altitude so we'll find out when I get to Texas

**Lethal Performance** · 02-24-2008, 10:51 PM

9.82@145

**lazer96gt** · 02-24-2008, 11:12 PM

12.05@113

10-26-2007, 01:19 AM	#1
ChrisGT2000 Registered User Join Date: Apr 2007 Location: san antonio Posts: 855 Trader Rating: (5)	online dyno Speed Calculators, From RPM Outlet Try this link if you have been to the track and know your trap speed and weight to see what kind of HP to wheels your doing.

10-31-2007, 03:21 PM	#3
95 GTS Back in the saddle again Join Date: Feb 2006 Location: Texas Posts: 1,484 Trader Rating: (0)	342 rwhp for my estimate __________________ 2007 Reflex Silver Wolfsburg Jetta - new hotness 1995 Canary Yellow GTS - Sold 12.81@106.2 w/1.80 60' Boltons/E303 + 3100 lbs + M&H 246 HP/ 290 TQ 12.57 @ 109.21 w/1.76 60' Boltons/GT40Ps/XE270 + 3240 lbs + 555Rs 295 HP / 321 TQ

10-31-2007, 05:03 PM	#4
4.6stanger Three-hundredths of a second away from it!!!! Join Date: Apr 2007 Location: Lufkin, Texas Posts: 2,588 Trader Rating: (2)	I guess its pretty cool, but then again its just a estimate (that was big time off for me) __________________ 2002 Mustang GT-K&N FIPK, Accufab Plenum/ 75mm T-body, Diablosport Predator, 4.10s, Pro 5.0 shifter, Bassani O/r x-pipe, Magnaflow Magnapacks, Steeda pulleys, Mickey Thompson ET streets, Moser axles, Eibach Sportlines, Hotchkis U/Lca's, 180* t-stat_ best e.t 13.02@103!!!! Soon to come: Weight reduction, weld pro-stars and fox springs.

11-01-2007, 07:14 AM	#7
smlopez383 Registered User Join Date: Sep 2005 Location: S.A. Posts: 206 Trader Rating: (0)	625 hp but and 9.8 on the e.t reality unknown on rwhp and 9.96@ 138 in the qtr __________________ "IN THAT ASS WITH PUMP GAS"

11-02-2007, 05:50 PM	#8
seco 4 valve FTW Join Date: Apr 2005 Location: DALLAS Posts: 929 Trader Rating: (0)	interesting..... but I don't have a clue how much my 99 4.6L weighs. The stang has no weight loss mods....... anybody? average? __________________ SLP loud mouth cat-back, Pro 5.0 short throw, 4.30's, Moser 31 spline axles, Eaton carrier, Steeda sport springs, chrome 18x9 18x10 Saleens, NT555's 285/40/18 rear, MAC O/R Hpipe, RAM power grip dual friction..... Last edited by seco; 11-02-2007 at 05:53 PM.

10-31-2007, 05:32 PM	#5
TrueBlueVenom in a happy place Join Date: Jun 2003 Location: San Antonio Posts: 5,802 Trader Rating: (0)	did the reverse. i haven't weighed mine yet. i entered 3300 lbs. 353 HP 12.27 @ 111

11-02-2007, 10:02 PM	#9
4.6stanger Three-hundredths of a second away from it!!!! Join Date: Apr 2007 Location: Lufkin, Texas Posts: 2,588 Trader Rating: (2)	3400....Maybe. LOL __________________ 2002 Mustang GT-K&N FIPK, Accufab Plenum/ 75mm T-body, Diablosport Predator, 4.10s, Pro 5.0 shifter, Bassani O/r x-pipe, Magnaflow Magnapacks, Steeda pulleys, Mickey Thompson ET streets, Moser axles, Eibach Sportlines, Hotchkis U/Lca's, 180* t-stat_ best e.t 13.02@103!!!! Soon to come: Weight reduction, weld pro-stars and fox springs.

11-03-2007, 03:29 PM	#10
Hmbre97 Registered User Join Date: Feb 2006 Location: Austin Posts: 323 Trader Rating: (1)	Just for reference, my stock Mach 1 with no weight reduction mods weighed 3460 with half a tank of gas and no driver. I think an iron block 2V and an alum block 4V weigh about the same. __________________ -Herb- 03 TR Mach 1

11-03-2007, 05:59 PM	#11
Agent Jones Get It? Join Date: Mar 2006 Location: San Antonio Posts: 7,087 Trader Rating: (1)	That tool was dead on with my numbers......good find

11-06-2007, 11:28 AM	#12
FordGT08 Registered User Join Date: Jan 2007 Location: San Antonio Posts: 1,239 Trader Rating: (0)	yeah its off a lot sometimes

11-07-2007, 12:33 AM	#13
AdRock I am the Great Cornholio, give me all your TP Join Date: Nov 2003 Location: On The Move Posts: 5,236 Trader Rating: (5)	I did mine and it was off. 3400lbs w 100mph trap speed netted a calculation of 265hp at the wheels. Last dyno I only put down 239. __________________ '02 Stang GT Just cause you don't understand what's going on ...don't mean it don't make no sense And just cause you don't like it,...don't mean it aint no good And let me tell you something Before you go taking a walk in my world,...you better take a look at the real world Cause this aint no Mr. Rogers Neighborhood Can you say "feel like shit?"Yea maybe sometimes I do feel like shit I aint happy about it, but I'd rather feel like shit than be full of shit! And if I offended you, Oh I'm sorry, But, maybe you need to be offended But here's my apology and one more thing........Fuck you! Cause you can't bring me down

02-24-2008, 10:51 PM	#19
Lethal Performance LSS Sponsor Join Date: Jun 2007 Location: SA,TX Posts: 361 Trader Rating: (1)	9.82@145 __________________ www.lethalperformancesatx.com New website Dyno Tuning with: Hp tuners,SCT,Diablo and LT1 edit Email us at lethalperformance@yahoo.com. We will get back with you Open Tuesday thru Friday 9:00am to 6:30pm Saturday's by appointment only

02-24-2008, 11:12 PM	#20
lazer96gt LSS Sponsor Join Date: Mar 2006 Location: San Antonio Posts: 1,416 Trader Rating: (5)	12.05@113 __________________ 96 SVT#6858 of 7496 Click the link below. Inventory updated regularly. http://www.autotrader.com/dealers/dd...um_records=100 210-658-6296 or call toll free 1-866-221-1190

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: