removing uca bushings

V6Alex · 10-25-2003, 03:32 PM

anyone got any tips on how to get uca bushings out of the axle housing while the rear end is still on the car? sprayed lots of WD on them and they wont budge.

I'm about to get the torch and just cut them out, burning rubber and all.

**12second5.0** · 10-25-2003, 03:43 PM

I use an air hammer to knock them out.I have a special socket to knock the new ones in!:jeff:

dcm4136 · 10-25-2003, 11:26 PM

A really big drill bit. :jeff:

10-25-2003, 03:32 PM	#1
V6Alex my 6 > my cobra Join Date: Jun 2003 Location: san antonio Posts: 354 Trader Rating: (0)	removing uca bushings anyone got any tips on how to get uca bushings out of the axle housing while the rear end is still on the car? sprayed lots of WD on them and they wont budge. I'm about to get the torch and just cut them out, burning rubber and all.

10-25-2003, 03:43 PM	#2
12second5.0 Check ya later! Join Date: Jun 2003 Location: Marion,Texas Posts: 8,569 Trader Rating: (0)	I use an air hammer to knock them out.I have a special socket to knock the new ones in!:jeff: __________________

10-25-2003, 11:26 PM	#3
dcm4136 Ooh-Rah Marine Corps Join Date: Jun 2003 Posts: 1,166 Trader Rating: (0)	A really big drill bit. :jeff: __________________ 88 vert Be polite and professional, but have a plan to kill everyone you meet.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: