[Glaxtx]

When I got my '90 LX about a month ago, there were a few extra parts in the trunk. In one of the boxes there is a set of Crane rockers, and I'm trying to figure out the ratio. They are gold, and the only marking aside for the Crane logo, is the number "P026". Anybody have an idea of what ratio they may be? I've searched all over, including Crane's site, and can't seem to find anything that matches. The only gold ones they have are the race rockers, but even those have ratios etched into them. Thanks for the help!
Matt

[Hammered]

Originally Posted by Glaxtx

When I got my '90 LX about a month ago, there were a few extra parts in the trunk. In one of the boxes there is a set of Crane rockers, and I'm trying to figure out the ratio. They are gold, and the only marking aside for the Crane logo, is the number "P026". Anybody have an idea of what ratio they may be? I've searched all over, including Crane's site, and can't seem to find anything that matches. The only gold ones they have are the race rockers, but even those have ratios etched into them. Thanks for the help!
Matt

wanna sell them...I need a set?

[Glaxtx]

Originally Posted by Hammered

wanna sell them...I need a set?

Actually I'm thinking about it. I've got the rockers, and nuts, but no pedestals, if they are required. Make me an offer.

[Hammered]

Originally Posted by Glaxtx

Actually I'm thinking about it. I've got the rockers, and nuts, but no pedestals, if they are required. Make me an offer.

Cool I need some stud mount 1.6.....let me research these..are they 3/8 or 7/16?

[Glaxtx]

Originally Posted by Hammered

Cool I need some stud mount 1.6.....let me research these..are they 3/8 or 7/16?

Not a clue, didn't even think about that. I'll check when I get home and measure them. They seem to be in really good shape, no defects at all. I'm pretty sure they have been installed, they have an oily texture. I don't know anything else about them, how long they were used or anything. Check on Cranes site if you're interested, my brother said it looks like you need different heads for this set, or at least some head work, but check it out and let me know what you think.

[Hammered]

Originally Posted by Glaxtx

Not a clue, didn't even think about that. I'll check when I get home and measure them. They seem to be in really good shape, no defects at all. I'm pretty sure they have been installed, they have an oily texture. I don't know anything else about them, how long they were used or anything. Check on Cranes site if you're interested, my brother said it looks like you need different heads for this set, or at least some head work, but check it out and let me know what you think.

why you you need different heads?

[Glaxtx]

Forget I said that. I see what he was reading, and he was in the wrong section. I'll check the size when I get home. Here is what they look like:

http://www.cranecams.com/?show=promo...d355d5d4161a2b

[flamed90fox]

they are stud mount ,,,yes you will need a differant set of heads ...after market roush 200 ect 3/8 stud