Seat Track - Lone Star Stangs

rlauer · 06-04-2007, 07:56 AM

I am thinking of removing my power seat track for the drivers seat and replacing it with a manual one. Is it possible to use a passanger side manual seat track on the drivers seat?

Thanks,

Rob

96greengt · 06-04-2007, 01:03 PM

I don't think it would work. The dimensions are the same, but are right and left specific.

But I did find these...

eBay Motors: MUSTANG SEAT TRACK (FORD 5.0 COBRA 351W) (item 130120333859 end time Jun-07-07 20:40:41 PDT)

eBay Motors: 79-93 MUSTANG 5.0 BUCKET SEAT TRACKS (item 300117372882 end time Jun-08-07 17:50:47 PDT)

for both OBO

eBay Motors: MUSTANG SEAT TRACK WHAS ON 92 LX (item 130121072645 end time Jun-10-07 10:55:37 PDT)

**bighoss88lx** · 06-04-2007, 08:39 PM

The OEM seat tracks are not interchangeable from L to R or vice versa.

TWISTEDCOUPE · 06-10-2007, 02:37 AM

can get some new ones from Ford dealer pretty cheap for 87-93 as I did.

**bighoss88lx** · 06-10-2007, 07:31 PM

Quote:

Originally Posted by TWISTEDCOUPE

can get some new ones from Ford dealer pretty cheap for 87-93 as I did.

I didnt know they were still availible new. You have the part #'s for them?

2k4mk1 · 06-11-2007, 02:48 PM

Does the power 1 work properly??
If so Ill trade ya amanual set I have in the garage
LMK

rlauer · 06-12-2007, 07:55 AM

I have purchased a manual track off ebay. I will probably be selling my power track once the other in installed.

Thanks for everyone's assistance.

96greengt · 06-12-2007, 08:18 AM

Did you use one of my links???

Finders fee?? reward?? lol

2k4mk1 · 06-12-2007, 10:27 AM

Oh well I woulda swapped ya out but its your money

rlauer · 06-12-2007, 02:22 PM

I think I missed out on the one I was bidding on from your links, but then found another. I do thank you for your help because I expanded my search based on some of the results you sent me to find what I was looking for.

Thanks,

96greengt · 06-12-2007, 07:38 PM

I take paypal !!! lol

06-04-2007, 07:56 AM	#1
rlauer Registered User Join Date: Feb 2007 Location: Richmond, TX Posts: 28	Seat Track I am thinking of removing my power seat track for the drivers seat and replacing it with a manual one. Is it possible to use a passanger side manual seat track on the drivers seat? Thanks, Rob

06-04-2007, 01:03 PM	#2
96greengt LOL @ your mom Join Date: Feb 2007 Location: N.E. SA Posts: 8,745	I don't think it would work. The dimensions are the same, but are right and left specific. But I did find these... eBay Motors: MUSTANG SEAT TRACK (FORD 5.0 COBRA 351W) (item 130120333859 end time Jun-07-07 20:40:41 PDT) eBay Motors: 79-93 MUSTANG 5.0 BUCKET SEAT TRACKS (item 300117372882 end time Jun-08-07 17:50:47 PDT) for both OBO eBay Motors: MUSTANG SEAT TRACK WHAS ON 92 LX (item 130121072645 end time Jun-10-07 10:55:37 PDT) __________________ Built 00 Windsor engine, .20 over, 11.6:1cr, fully ported heads, Hardballer intake w/cooling mod, Scat rods, Probe pistons, Cobra crank, tri-metal Clevite race bearings, VT Stage 2 N/A cams, adjustable cam gears, Canton windage tray, MMR oil pump, Cobra pick up, 75MM Accufab t-body, Dragon plenum, JLT CAI, 24# injectors, Bassani mid lengths, mufflers & O/R X,255lph fuel pump, BBK FPR, Fidanza aluminum flywheel, AJE K-member, ARP hardware everywhere, X-Cal SCT custom tuned, 3.73's, Pro 5.0, polygraphite motor mounts, over 300+ RWHP & 320+ TQ

06-04-2007, 08:39 PM	#3
bighoss88lx Killing is my Business...And Business is Good! Join Date: Aug 2003 Location: Elmendorf, Tejas Posts: 5,960	The OEM seat tracks are not interchangeable from L to R or vice versa. __________________ 1988 Mustang LX

06-11-2007, 02:48 PM	#6
2k4mk1 DONT HATE ME CUZ YOU AINT ME!!!! Join Date: Dec 2003 Location: SanAntonio Posts: 6,531	Does the power 1 work properly?? If so Ill trade ya amanual set I have in the garage LMK __________________ 04 Oxford White MACH1,5 SPD with IUP,K&NAircharger Borla Stingers,SLP Catted X pipe,Tri-ax,SCT Flashtune,Max Mtr Spt 4 bolt adj C/C plates, Drilled/Slotted rotors all 4 corners 281 rwhp on Mustang Dyno,306 rwhp on a Dynojet 94 Black Lightning Daily Driver&85GT FACH1 Project under construction

06-12-2007, 08:18 AM	#8
96greengt LOL @ your mom Join Date: Feb 2007 Location: N.E. SA Posts: 8,745	Did you use one of my links??? Finders fee?? reward?? lol __________________ Built 00 Windsor engine, .20 over, 11.6:1cr, fully ported heads, Hardballer intake w/cooling mod, Scat rods, Probe pistons, Cobra crank, tri-metal Clevite race bearings, VT Stage 2 N/A cams, adjustable cam gears, Canton windage tray, MMR oil pump, Cobra pick up, 75MM Accufab t-body, Dragon plenum, JLT CAI, 24# injectors, Bassani mid lengths, mufflers & O/R X,255lph fuel pump, BBK FPR, Fidanza aluminum flywheel, AJE K-member, ARP hardware everywhere, X-Cal SCT custom tuned, 3.73's, Pro 5.0, polygraphite motor mounts, over 300+ RWHP & 320+ TQ

06-10-2007, 02:37 AM	#4
TWISTEDCOUPE Registered User Join Date: Sep 2005 Location: San Antonio Posts: 142	can get some new ones from Ford dealer pretty cheap for 87-93 as I did.

06-12-2007, 07:55 AM	#7
rlauer Registered User Join Date: Feb 2007 Location: Richmond, TX Posts: 28	I have purchased a manual track off ebay. I will probably be selling my power track once the other in installed. Thanks for everyone's assistance.

06-12-2007, 10:27 AM	#9
2k4mk1 DONT HATE ME CUZ YOU AINT ME!!!! Join Date: Dec 2003 Location: SanAntonio Posts: 6,531	Oh well I woulda swapped ya out but its your money __________________ 04 Oxford White MACH1,5 SPD with IUP,K&NAircharger Borla Stingers,SLP Catted X pipe,Tri-ax,SCT Flashtune,Max Mtr Spt 4 bolt adj C/C plates, Drilled/Slotted rotors all 4 corners 281 rwhp on Mustang Dyno,306 rwhp on a Dynojet 94 Black Lightning Daily Driver&85GT FACH1 Project under construction

06-12-2007, 02:22 PM	#10
rlauer Registered User Join Date: Feb 2007 Location: Richmond, TX Posts: 28	I think I missed out on the one I was bidding on from your links, but then found another. I do thank you for your help because I expanded my search based on some of the results you sent me to find what I was looking for. Thanks,

06-12-2007, 07:38 PM	#11
96greengt LOL @ your mom Join Date: Feb 2007 Location: N.E. SA Posts: 8,745	I take paypal !!! lol __________________ Built 00 Windsor engine, .20 over, 11.6:1cr, fully ported heads, Hardballer intake w/cooling mod, Scat rods, Probe pistons, Cobra crank, tri-metal Clevite race bearings, VT Stage 2 N/A cams, adjustable cam gears, Canton windage tray, MMR oil pump, Cobra pick up, 75MM Accufab t-body, Dragon plenum, JLT CAI, 24# injectors, Bassani mid lengths, mufflers & O/R X,255lph fuel pump, BBK FPR, Fidanza aluminum flywheel, AJE K-member, ARP hardware everywhere, X-Cal SCT custom tuned, 3.73's, Pro 5.0, polygraphite motor mounts, over 300+ RWHP & 320+ TQ

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: