Steeda UCA

egomez24 · 01-25-2008, 05:25 PM

I just bought the double adjustable Upper Control arm along with the Lower control arms for my Roush. I will be installing these on my car. Can anybody tell me what is the correct adjustment for the UCA. Is it just adjusted til it slip fits or is there more intense rigging involved. Any help would be greatly appreciated.

**psiperformance** · 01-27-2008, 02:16 PM

you need to have the car on the ground with the suspension loaded eric and you need to then adjust the upper arm till you reach aproximatly 3-4 degrees pinion down angle.

egomez24 · 01-27-2008, 05:15 PM

Cool, thanks for the heads up. Dean.

01-25-2008, 05:25 PM	#1
egomez24 Novi 22 Join Date: May 2007 Location: San Antonio Posts: 478 Trader Rating: (1)	Steeda UCA I just bought the double adjustable Upper Control arm along with the Lower control arms for my Roush. I will be installing these on my car. Can anybody tell me what is the correct adjustment for the UCA. Is it just adjusted til it slip fits or is there more intense rigging involved. Any help would be greatly appreciated. __________________ 06 Roush Novi 2k ARH LT ARH Catted Xpipe Magnaflows 355 Gears 492rwhp/420rwtq

01-27-2008, 02:16 PM	#2
psiperformance LSS Sponsor Join Date: Mar 2006 Posts: 876 Trader Rating: (1)	you need to have the car on the ground with the suspension loaded eric and you need to then adjust the upper arm till you reach aproximatly 3-4 degrees pinion down angle. __________________ PSI Performance Solutions 210-655-6546 10811 nacogdoches road San Antonio TX 78217 cmr tuners and full service performance shop.

01-27-2008, 05:15 PM	#3
egomez24 Novi 22 Join Date: May 2007 Location: San Antonio Posts: 478 Trader Rating: (1)	Cool, thanks for the heads up. Dean. __________________ 06 Roush Novi 2k ARH LT ARH Catted Xpipe Magnaflows 355 Gears 492rwhp/420rwtq

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: