sub install

gaddo · 01-27-2007, 11:34 PM

hey guys i'm looking to install some subs in in my sn95. the thing is i want to do the install in my back seat...anyone got pics of what it could look like?

timpryor · 01-28-2007, 12:20 AM

check out my other thread
Pics of my custom rear seat delete and damn tire

keg65 · 01-28-2007, 10:36 AM

how many subs you lookin to put?
gonna have the amp shown back there too?

gaddo · 01-30-2007, 11:45 PM

ok heres the list:2 12's, 1 amp, 2 caps, and a power distributer...if there is a cool way to have it all showing,then i would like to have em all out.

FnSweet06 · 01-30-2007, 11:56 PM

when you say "in the back seat" what do you mean by that?

i got the same set-up and its all in display. i mounted the amp to back of the seat. a custom fitted box that hold the 12's that fits just w/ in the opening of the trunk rectangle hole. caps can go on either side of the trunk either strap't or burried

keg65 · 01-31-2007, 07:57 PM

are you replacing the back seat with the set up?
Like a custom box in place of where the back seat used to be?
I could invision a custom box with 1 12" on each side with the amp in front on the floor area and the other parts on the sides and between the speakers.
all fiberglass finished or upholstered, but with that smooth shape that matches the interior filling where the seat used to be.
like you would see in a show car

keg65 · 01-31-2007, 08:33 PM

http://www.cartunes.com/installs/for...R/rear_sub.jpg
here is a pic of one in a mustang
I would rather see the sub on the back facing forward (also angled and sticking out some,not just flat) and the amp and stuff on the bottom

Maybe incorporate the center console into the shape, like have the amp over the hump mounted in/on a shape like the console extended to the back.

OK enough ideas, lets get some feed back

timpryor · 01-31-2007, 08:36 PM

Quote:

Originally Posted by keg65

I would rather see the sub on the back facing forward and the amp and stuff on the bottom

like mine?? if so i have a guy that builds them for about 150 bucks

keg65 · 01-31-2007, 08:44 PM

yeah, yours looks good, but curved to match the side interior panels

and of course without the blown tire

gaddo · 02-03-2007, 09:20 PM

ok, i pretty much decided to run with something like what keg65 posted. the box is basically the same but i can't get mine to lay as flat as that. but there will be a beauty board to cover up everything that doesn't sit flush. oh and my amp will be mounted in between the subs,angled foward.i'm not installing the caps unless the system really drains alot of power. i'm toying with the idea of plexy glass and all,but i don't wanna cross over the rice line.

gaddo · 02-03-2007, 09:33 PM

we made the design out of cardboard,will post pics of what it looks like soon so yall can tell me whatcha think.

John#21 · 02-04-2007, 08:56 AM

go to caraudioforums.com

and search for " the big three"

keg65 · 02-08-2007, 07:20 PM

pics?

deon · 02-23-2007, 11:18 AM

Quote:

Originally Posted by keg65

pics?

+1!

01-27-2007, 11:34 PM	#1
gaddo rookie Join Date: Nov 2004 Location: waco,tx Posts: 19 Trader Rating: (0)	sub install hey guys i'm looking to install some subs in in my sn95. the thing is i want to do the install in my back seat...anyone got pics of what it could look like?

01-28-2007, 10:36 AM	#3
keg65 Change always makes Sense (or Cents) Join Date: May 2005 Location: NE San Antonio Posts: 1,238 Trader Rating: (0)	how many subs you lookin to put? gonna have the amp shown back there too? __________________ 1 of 472 Year 2005 Mustang GT, Black, Convertible with Black Top, Automatic Transmission, Dark Charcoal/Red Interior.

01-31-2007, 07:57 PM	#6
keg65 Change always makes Sense (or Cents) Join Date: May 2005 Location: NE San Antonio Posts: 1,238 Trader Rating: (0)	are you replacing the back seat with the set up? Like a custom box in place of where the back seat used to be? I could invision a custom box with 1 12" on each side with the amp in front on the floor area and the other parts on the sides and between the speakers. all fiberglass finished or upholstered, but with that smooth shape that matches the interior filling where the seat used to be. like you would see in a show car __________________ 1 of 472 Year 2005 Mustang GT, Black, Convertible with Black Top, Automatic Transmission, Dark Charcoal/Red Interior.

01-31-2007, 08:33 PM	#7
keg65 Change always makes Sense (or Cents) Join Date: May 2005 Location: NE San Antonio Posts: 1,238 Trader Rating: (0)	http://www.cartunes.com/installs/for...R/rear_sub.jpg here is a pic of one in a mustang I would rather see the sub on the back facing forward (also angled and sticking out some,not just flat) and the amp and stuff on the bottom Maybe incorporate the center console into the shape, like have the amp over the hump mounted in/on a shape like the console extended to the back. OK enough ideas, lets get some feed back __________________ 1 of 472 Year 2005 Mustang GT, Black, Convertible with Black Top, Automatic Transmission, Dark Charcoal/Red Interior. Last edited by keg65; 01-31-2007 at 08:38 PM.

01-31-2007, 08:44 PM	#9
keg65 Change always makes Sense (or Cents) Join Date: May 2005 Location: NE San Antonio Posts: 1,238 Trader Rating: (0)	yeah, yours looks good, but curved to match the side interior panels and of course without the blown tire __________________ 1 of 472 Year 2005 Mustang GT, Black, Convertible with Black Top, Automatic Transmission, Dark Charcoal/Red Interior.

01-30-2007, 11:45 PM	#4
gaddo rookie Join Date: Nov 2004 Location: waco,tx Posts: 19 Trader Rating: (0)	ok heres the list:2 12's, 1 amp, 2 caps, and a power distributer...if there is a cool way to have it all showing,then i would like to have em all out.

01-30-2007, 11:56 PM	#5
FnSweet06 Registered User Join Date: Jan 2006 Location: San Antone Posts: 4,554 Trader Rating: (4)	when you say "in the back seat" what do you mean by that? i got the same set-up and its all in display. i mounted the amp to back of the seat. a custom fitted box that hold the 12's that fits just w/ in the opening of the trunk rectangle hole. caps can go on either side of the trunk either strap't or burried

02-03-2007, 09:20 PM	#10
gaddo rookie Join Date: Nov 2004 Location: waco,tx Posts: 19 Trader Rating: (0)	ok, i pretty much decided to run with something like what keg65 posted. the box is basically the same but i can't get mine to lay as flat as that. but there will be a beauty board to cover up everything that doesn't sit flush. oh and my amp will be mounted in between the subs,angled foward.i'm not installing the caps unless the system really drains alot of power. i'm toying with the idea of plexy glass and all,but i don't wanna cross over the rice line. Last edited by gaddo; 02-03-2007 at 09:32 PM.

02-03-2007, 09:33 PM	#11
gaddo rookie Join Date: Nov 2004 Location: waco,tx Posts: 19 Trader Rating: (0)	we made the design out of cardboard,will post pics of what it looks like soon so yall can tell me whatcha think.

02-04-2007, 08:56 AM	#12
John#21 I wasn't born with enough middle fingers. Join Date: Aug 2005 Posts: 4,487 Trader Rating: (0)	go to caraudioforums.com and search for " the big three" __________________ GO SPURS GO

02-08-2007, 07:20 PM	#13
keg65 Change always makes Sense (or Cents) Join Date: May 2005 Location: NE San Antonio Posts: 1,238 Trader Rating: (0)	pics? __________________ 1 of 472 Year 2005 Mustang GT, Black, Convertible with Black Top, Automatic Transmission, Dark Charcoal/Red Interior.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: