thump - Lone Star Stangs

OttGT · 11-18-2003, 01:51 AM

has anyone hooked up subs to the mach1000 system? does the head unit have rca outputs ?

11-18-2003, 03:10 AM

i fnot, you can use an high input to low input adapter.

I have some subs and AM P if you are wanting some.

2 MTX freeair subs that mount rigt behind the rear seat. and a 300 wat amp to push them plenty

Musclestang721 · 11-18-2003, 09:56 AM

Quote:

Originally posted by OttGT
has anyone hooked up subs to the mach1000 system? does the head unit have rca outputs ?

i thought the 1000 system had subs? either way the factory decks do not have RCA's that ive seen.

03SSgt · 11-19-2003, 11:52 AM

Quote:

Originally posted by OttGT
has anyone hooked up subs to the mach1000 system? does the head unit have rca outputs ?

you have a mach 460 unit, just like mine

wait, your car is IDENTICAL to mine

GIVE ME YOUR RIMS!!!!

tire · 11-19-2003, 12:05 PM

i don't know if the mach1000 is the same, but for my mach460 i got a converter and tapped into the rear speaker wires before they went into the speaker itself. there is a write up on mustangworld about how to do it, but it's not the best way to do it.

OttGT · 11-24-2003, 02:29 AM

Quote:

Originally posted by 03SSgt
you have a mach 460 unit, just like mine
wait, your car is IDENTICAL to mine
GIVE ME YOUR RIMS!!!!

oh yeah

no you cannot have my rims.

how much is the drop going to be with the eibach (sp) springs if any. :

CHips · 11-25-2003, 01:00 PM

Quote:

Originally posted by Musclestang721
i thought the 1000 system had subs? either way the factory decks do not have RCA's that ive seen.

werd, the mach 1000 comes with subs already. as i understand, its a real bitch to hook up subs/amp to a mach 460, but i think it does have rca terminals. im not completely sure, though

txcobra96 · 12-11-2003, 12:08 AM

i never cared much for the stereo, but after about 4 yrs of having my car.. the mach460 started giving out, (paper coned speakers) trust me, the best thing to do---1. would be to tap into the speaker wires in the rear, (the 4x6s in the rear are in a large plastic container- odd shaped speaker box weighs like 30lbs), look for one of the small silver amps- and try and find the + and - wires-- then add rca converters and hook the amp up that way..2. or if you buy another head unit, it should have RCA sub outs..

quiksilvr · 12-11-2003, 01:09 AM

it does have output but the mach isn't designed for aftermarket stereo equiptment like that.

txcobra96 · 12-12-2003, 07:52 PM

if the mach 1000 has rca outs, perfect- it doesnt matter how many watts you get from the head unit. all you need is stereo signal, once the rcas plug into the amp- the amp will regulate the amount of watts sent to the subs, as it was designed to do..

11-18-2003, 01:51 AM	#1
OttGT Registered User Join Date: Oct 2003 Location: San Antonio Posts: 237	thump has anyone hooked up subs to the mach1000 system? does the head unit have rca outputs ?

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

11-18-2003, 03:10 AM	#2
95snoozer Guest Posts: n/a	i fnot, you can use an high input to low input adapter. I have some subs and AM P if you are wanting some. 2 MTX freeair subs that mount rigt behind the rear seat. and a 300 wat amp to push them plenty

11-19-2003, 12:05 PM	#5
tire ka-chow! Join Date: Jun 2003 Location: Japan Posts: 5,749	i don't know if the mach1000 is the same, but for my mach460 i got a converter and tapped into the rear speaker wires before they went into the speaker itself. there is a write up on mustangworld about how to do it, but it's not the best way to do it.

12-11-2003, 12:08 AM	#8
txcobra96 Registered User Join Date: Dec 2003 Location: san antonio tx Posts: 43	i never cared much for the stereo, but after about 4 yrs of having my car.. the mach460 started giving out, (paper coned speakers) trust me, the best thing to do---1. would be to tap into the speaker wires in the rear, (the 4x6s in the rear are in a large plastic container- odd shaped speaker box weighs like 30lbs), look for one of the small silver amps- and try and find the + and - wires-- then add rca converters and hook the amp up that way..2. or if you buy another head unit, it should have RCA sub outs..

12-11-2003, 01:09 AM	#9
quiksilvr LSS Regular Join Date: Jun 2003 Location: Houston, TX Posts: 437	it does have output but the mach isn't designed for aftermarket stereo equiptment like that.

12-12-2003, 07:52 PM	#10
txcobra96 Registered User Join Date: Dec 2003 Location: san antonio tx Posts: 43	if the mach 1000 has rca outs, perfect- it doesnt matter how many watts you get from the head unit. all you need is stereo signal, once the rcas plug into the amp- the amp will regulate the amount of watts sent to the subs, as it was designed to do..