What are these worth?

PearlWhiteGT · 07-19-2007, 10:43 AM

I have some Bassani 4840BX mufflers on my 1990 GT w/ about 4K miles. Thinking of going a different route so what should I ask for them? No tail pipes, just the mufflers.

96greengt · 07-26-2007, 10:18 PM

What are the dimensions, L/W/H, setting, and inlet/outlet sizes?
Stainless steel or the other one they make?
Got pix?

PearlWhiteGT · 07-27-2007, 09:03 AM

I don't know the dimensons off the top of my head but i'm sure you can look them up. They are the 4840BX series, not stainless. 2.5" in/out offset/offset Can't get pics cuz they are still on the car. I paid $225.00 plus shipping & i'm looking to get $165.00 OBO

96greengt · 07-27-2007, 12:54 PM

Let me look into them and I will get back, but I am interested.

PearlWhiteGT · 07-27-2007, 05:15 PM

Cool, LMK know.

07-19-2007, 10:43 AM	#1
PearlWhiteGT Registered User Join Date: Sep 2006 Location: Corpus Christi Posts: 373 Trader Rating: (0)	What are these worth? I have some Bassani 4840BX mufflers on my 1990 GT w/ about 4K miles. Thinking of going a different route so what should I ask for them? No tail pipes, just the mufflers. __________________

07-26-2007, 10:18 PM	#2
96greengt LOL @ your mom Join Date: Feb 2007 Location: N.E. SA Posts: 8,680 Trader Rating: (21)	What are the dimensions, L/W/H, setting, and inlet/outlet sizes? Stainless steel or the other one they make? Got pix? __________________ Built 00 Windsor engine, .20 over, 11.6:1cr, fully ported heads, Hardballer intake w/cooling mod, Scat rods, Probe pistons, Cobra crank, tri-metal Clevite race bearings, VT Stage 2 N/A cams, adjustable cam gears, Canton windage tray, MMR oil pump, Cobra pick up, 75MM Accufab t-body, Dragon plenum, JLT CAI, 24# injectors, Bassani mid lengths, mufflers & O/R X,255lph fuel pump, BBK FPR, Fidanza aluminum flywheel, AJE K-member, ARP hardware everywhere, X-Cal SCT custom tuned, 3.73's, Pro 5.0, polygraphite motor mounts, over 300+ RWHP & 320+ TQ

07-27-2007, 09:03 AM	#3
PearlWhiteGT Registered User Join Date: Sep 2006 Location: Corpus Christi Posts: 373 Trader Rating: (0)	I don't know the dimensons off the top of my head but i'm sure you can look them up. They are the 4840BX series, not stainless. 2.5" in/out offset/offset Can't get pics cuz they are still on the car. I paid $225.00 plus shipping & i'm looking to get $165.00 OBO __________________

07-27-2007, 12:54 PM	#4
96greengt LOL @ your mom Join Date: Feb 2007 Location: N.E. SA Posts: 8,680 Trader Rating: (21)	Let me look into them and I will get back, but I am interested. __________________ Built 00 Windsor engine, .20 over, 11.6:1cr, fully ported heads, Hardballer intake w/cooling mod, Scat rods, Probe pistons, Cobra crank, tri-metal Clevite race bearings, VT Stage 2 N/A cams, adjustable cam gears, Canton windage tray, MMR oil pump, Cobra pick up, 75MM Accufab t-body, Dragon plenum, JLT CAI, 24# injectors, Bassani mid lengths, mufflers & O/R X,255lph fuel pump, BBK FPR, Fidanza aluminum flywheel, AJE K-member, ARP hardware everywhere, X-Cal SCT custom tuned, 3.73's, Pro 5.0, polygraphite motor mounts, over 300+ RWHP & 320+ TQ

07-27-2007, 05:15 PM	#5
PearlWhiteGT Registered User Join Date: Sep 2006 Location: Corpus Christi Posts: 373 Trader Rating: (0)	Cool, LMK know. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: