What do yall think....

[stangfreak]

I am looking into a MAJOR mod list for my classic.

this is what I am thinking...

Heights front end set:
this would get rid of the ugly shock towers and manual linkage and put in IFS in the front with tubular upper and lower control arms Q41 springs and shocks with rack-n-pinion steering and a 9:1 steering box.
(this would allow for a stroked 351W to go in):wowspring

and I am looking into getting either a Heights 3 or 4 link rear end kit with pan hard bar.

both kits would upgrade to disc brakes as well. remember I already have a T-5 swap in the car too.

what are yall' opinions on this? Photo document it and post on here?
If I can cut a deal with the owner and do a large purchase (bulk) how many people would be interested in getting one of these kits? (serious people ready to pay only please)

lmk what you all think.

[stangfreak]

no opinions on this or thoughts?

[izzy jr]

I don't have any useful advise. Sounds like alot of time/money to me but I'm sure it'll be one badass ride when your done!

[keg65]

heidts kits look good and seem priced well too

I plan on doing something similar to my 65, but not any time soon.

My coupe had alot of rust damage, so i don't have a problem modifying it alot. Plan on the MII front suspension, and a 4 link rear, both narrowed to fit wider tires. Also want the stroker windsor to a 427 ci., dual four bbl carbs under a tear drop hood. want to set the engine back a few inches, but not enough to have to sit further back. looking to put a T56 behind it so I can go low on the rear end and still have the overdrive for the road trips.

Photos for sure, I know I want to see it happen, even if it is not on my car

[12second5.0]

I am looking into a MAJOR mod list for my classic.

this is what I am thinking...

Heights front end set:
this would get rid of the ugly shock towers and manual linkage and put in IFS in the front with tubular upper and lower control arms Q41 springs and shocks with rack-n-pinion steering and a 9:1 steering box.
(this would allow for a stroked 351W to go in):wowspring

and I am looking into getting either a Heights 3 or 4 link rear end kit with pan hard bar.

both kits would upgrade to disc brakes as well. remember I already have a T-5 swap in the car too.

what are yall' opinions on this? Photo document it and post on here?
If I can cut a deal with the owner and do a large purchase (bulk) how many people would be interested in getting one of these kits? (serious people ready to pay only please)

lmk what you all think.

I have a built 351w ready to go into a classic. PM me if interested.......

[stangfreak]

thanks for the feed back.
as for the motor, I will have to wait. but will let you know when ready

[stangfreak]

Well guys, I got the catalog in from Heights and it looks doable. I am working out the details but we will see right.
If I get this going would anyone be interested in reading a photo doc on the install?
If so I can post it. (going to do it for myself either way)
this way, If yall want one you can see it done.

[izzy jr]

I'd say go ahead and post away somebody will probably need the info sooner or later + it'll be a good education for all us wish listers who can't afford it right now.

[12second5.0]

It sounds like a good project. I would have loved to do that to my classics when I owned them just never seemed to get around to doing it.

[stangfreak]

Cool, I will be sure to post it.
Now I just need a cool name for the car...

[psiperformance]

if your going to do it yourself better be sure you are extremely good with a welder and at fabrication.

i have done just this in my 1966 and the process is shown down the page

its a lot of work and i can tell you now

u can see the pics here

8urls1/1966 mustang - Photobucket - Video and Image Hosting

[stangfreak]

Those are great photos!

I know it is going to be intense, but I am sure I can do this fairly easily with hard work of course. As for the welding, I am going to have a friend of mine do it who is a multi-certified welder. Hopefully, all will go well with minimal problems (you know every project has them...lol)
but I guess if I have questions, I know who to call huh..

[stangfreak]

Well all my parts are on order and will be arriving shortly!
as for my original parts I will be selling those off so if your looking for any OEM and some performance stuff for a 65-66 stang pm me and I will pull it if available.
IE I have original steel wheel and hub caps, mag 500 wheels, Energy Suspension bushing kit complete never installed. Power steering pump (never installed) ect.
(I would post on classifieds but it's and update to the thread and maybe keeps yall interested)

[12second5.0]

Cool deal. Hope this project gets finished. I never quite had the time to get mine done so I sold them.

[stangfreak]

Cool deal. Hope this project gets finished. I never quite had the time to get mine done so I sold them.

Thanks.
I can get you a great deal on Heidts stuff if your wanting to try again.

[12second5.0]

Thanks.
I can get you a great deal on Heidts stuff if your wanting to try again.

It will not happen in the near future. I can guarantee you that. I need to have my shop built first before I take on a classic mustang project.

[stangfreak]

lol... true

[stangfreak]

Just got all my stuff in.

[izzy jr]

Just got all my stuff in.

any updates? had anytime to start throwin parts together yet?

[stangfreak]

Getting ready to pull the motor and front suspension in a week or so... will take pics.
then starts the real work.

[stangfreak]

motor is out along with trans, interior and all. basically a rolling shell.
I will try and get the pictures up shortly. Just bought a sandblaster so I will be getting ready for paint soon. My welder moved so I may be looking for someone real good with a torch. Also, If you have a classic and need parts, including a 289 FULL MOTOR LMK

[keg65]

what part of SA are you in? I would like to see that Heidts suspension in person if that would be possible. Have a shop or at home garage? Wanted to do that at home, but still having trouble getting all the junk out of my garage so I can even see my car again. But at least it is out of the weather and the rust damage is slowing.
How about some pics

[stangfreak]

PM sent.

[stangfreak]

Ok well, This weekend was a lot of work but a really fun time. The Cross member is installed and the suspension is at a "mock" build. I MUST tell ya'll that Darren from Xtreme Paint and Body was a Huge help. My buddy that was going to do the welding for me was unable to come in town and so he said he would help. His price was Very reasonable and he has great work ethic. His hospitality was better than that of the "big" shops. I would definitely recommend him and his shop for anyone that is in need of body work or help. Thank you again Darren.
So who wants some pics?

[X2CRAYZIX]

you just bought a sand blaster , you wanna sandblast my hood for me lol looking good man

[12second5.0]

I have a built 351w that would go really nice in that car........

[stangfreak]

lol.... Ok how much?
I have a 351w block .030 over sitting in my garage on an engine stand.
before I build a stroker, how much would yours be?
What's it made of? specs?
you know the run down please?

[12second5.0]

lol.... Ok how much?
I have a 351w block .030 over sitting in my garage on an engine stand.
before I build a stroker, how much would yours be?
What's it made of? specs?
you know the run down please?

Well,let's say you really need to come take a look if you are really interested. I built it to throw in my 66 coupe but I sold the car. It comes with alot of goodies.

[stangfreak]

pm sent.

[12second5.0]

pm sent back......

[95 GTS]

some one pm me what is in the darn motor! larry?

Oh and this suspension setup is F'n Dreamy

I would minitub so you could run meats in the rear.

What wheels will you go with? something high end and 2-3 piece?

[psiperformance]

some one pm me what is in the darn motor! larry?

Oh and this suspension setup is F'n Dreamy

I would minitub so you could run meats in the rear.

What wheels will you go with? something high end and 2-3 piece?

you mean like my car

[12second5.0]

some one pm me what is in the darn motor! larry?

Oh and this suspension setup is F'n Dreamy

I would minitub so you could run meats in the rear.

What wheels will you go with? something high end and 2-3 piece?

Davis, it wouldn't do any good. You'd probably doubt that it would make any real power. Just like any naysayers with my coupe.........

[stangfreak]

Man, That mini tub does look good, but I really don't think I will need it.
yet.

[keg65]

Hey the car looks great, seeing it in person really let me see what I needed to see.
It was very nice meeting you and family. I will be back to see the rear suspension, and maybe if you need a hand with the install, hopefully I would be available to help.
Thanks alot and I guess I know who to call when I'm ready for my swap.

[stangfreak]

Thanks, I appreciate that.
It was nice meeting you and your son.
I will let you know when the 4 link is in too.

[Stang6uy]

kick ass man......keep us posted...

[izzy jr]

glad to see your making progress on your car. Have you done anything else to it recently and what kind of sand blaster did you get and price if you don't mind. That's something i've been looking at for my car.

I did finally get all the brake lines installed,the m/c installed, rear end re-installed, new leaf springs/shackles, rear shocks. Still need to bleed the brake system and discovered the rubber in the front spring perches are shot so i'll hold off on swapping the front coils and shocks till I can get the new spring perches.

[stangfreak]

I just got a cheap one from harbor freight. normally like 109 but I got it for 79.99 on sale. then I just use playground sand. works like a champ.

[izzy jr]

pulled the old coils/shocks off the front, new spring perches should be here today so I can install new coils/shocks and sway bar. Then drop this pony back to all fours and see how the new stance looks.