WHAT INTAKE - Page 2 - Lone Star Stangs

95 GTS · 10-16-2007, 10:27 PM

if you choose that cam, which i do not agree with, you are going to need to flycut the pistons if you do not already have aftermarket pistons or some flycutting.

With a cam of that size i would run a systemax II or RPM II

BHAM · 10-29-2007, 12:45 AM

GO WITH WHAT PSI SAID ........HE'S RIGHT AND I DONT EVEN KNOW HIM

junkstang5.0 · 10-29-2007, 08:59 AM

Looking at all this I should try the PP and see what happens. I will keep all posted when all this happens seeing as how I will have to save some cash.

10-16-2007, 10:27 PM	#21
95 GTS Back in the saddle again Join Date: Feb 2006 Location: Texas Posts: 1,851	if you choose that cam, which i do not agree with, you are going to need to flycut the pistons if you do not already have aftermarket pistons or some flycutting. With a cam of that size i would run a systemax II or RPM II __________________ 2007 Reflex Silver Wolfsburg Jetta - new hotness 1995 Canary Yellow GTS - Sold 12.81@106.2 w/1.80 60' Boltons/E303 + 3100 lbs + M&H 246 HP/ 290 TQ 12.57 @ 109.21 w/1.76 60' Boltons/GT40Ps/XE270 + 3240 lbs + 555Rs 295 HP / 321 TQ

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

10-29-2007, 12:45 AM	#22
BHAM Registered User Join Date: Nov 2005 Location: paige tx Posts: 853	GO WITH WHAT PSI SAID ........HE'S RIGHT AND I DONT EVEN KNOW HIM

10-29-2007, 08:59 AM	#23
junkstang5.0 Registered User Join Date: Jul 2006 Location: SAN ANTONIO Posts: 102	Looking at all this I should try the PP and see what happens. I will keep all posted when all this happens seeing as how I will have to save some cash.