what type of mass air unit?

jorge morales · 03-28-2004, 10:08 PM

i have a 97 v6 mustang odered a intake kit dut it needs mass air unit what type should i get?

leo95 · 03-29-2004, 10:18 AM

Quote:

Originally Posted by jorge morales

i have a 97 v6 mustang odered a intake kit dut it needs mass air unit what type should i get?

make sure you get an air meter that matches you injectors i.e. 19 lb. per hour injectors the air meter also needs to match that.

Nighthawk · 03-29-2004, 10:22 AM

you should post this in the v6 tech forum. this is not san antonio related.

Firemanz · 03-29-2004, 10:29 AM

Moved.....

tire · 03-29-2004, 05:51 PM

unless you go power adder you don't need a larger MAF. it'd be a big waste of money for only a couple hp if you're lucky. you could benefit from a larger throttle body however. you stock is 56mm. the 99+ v6's have 60mm and is what you'd need if you wanted. however, you don't need anything at all to install the cold air. both your MAF and TB will bolt up lickity splitz. :pickle:

Gabe8496 · 04-01-2004, 02:02 PM

What intake (i'm assuming CAI) requires you to get a Mass Air Unit? This is already installed by factory. It should bolt up to your factory MAF. Don't get another MAF unless you have mods to justify it.

03-28-2004, 10:08 PM	#1
jorge morales nomore stang Join Date: Feb 2004 Location: San antonio, Tx Posts: 153 Trader Rating: (0)	what type of mass air unit? i have a 97 v6 mustang odered a intake kit dut it needs mass air unit what type should i get?

03-29-2004, 10:22 AM	#3
Nighthawk technology > displacement Join Date: Jun 2003 Location: San Antonio Posts: 4,658 Trader Rating: (6)	you should post this in the v6 tech forum. this is not san antonio related. __________________ My Garage

03-29-2004, 10:29 AM	#4
Firemanz Swimming in a sea of anxiety... Join Date: Jun 2003 Location: S.A., TX Posts: 6,277 Trader Rating: (0)	Moved..... __________________ 2003 Redfire Roush Stage II #6395 377.5hp/ 372.9tq@ 8psi Small vid of blower <----Click for mods....

04-01-2004, 02:02 PM	#6
Gabe8496 01/23/2004 @ 9:56 PM Join Date: Sep 2003 Location: San Benito, Brownsville, Harlingen (TEXAS) Posts: 205 Trader Rating: (0)	What intake (i'm assuming CAI) requires you to get a Mass Air Unit? This is already installed by factory. It should bolt up to your factory MAF. Don't get another MAF unless you have mods to justify it. __________________ Sonic Blue 1996 3.8L Coupe White 1984 5.0L GT Hatchback Select Stangs - RGV Mustang Club

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

03-29-2004, 05:51 PM	#5
tire ka-chow! Join Date: Jun 2003 Location: SoCal Posts: 5,745 Trader Rating: (1)	unless you go power adder you don't need a larger MAF. it'd be a big waste of money for only a couple hp if you're lucky. you could benefit from a larger throttle body however. you stock is 56mm. the 99+ v6's have 60mm and is what you'd need if you wanted. however, you don't need anything at all to install the cold air. both your MAF and TB will bolt up lickity splitz. :pickle: