 |
1 1/4 and 1inch billet spacers
Used em to run slicks and skinners on the Mach.
The 1 1/4 you don't need to do anything to the stock studs...the 1" you need to pop off 1/4inch.
Selling each set for $50 FIRM.
Pics in a bit.
PM, [email protected], 2105894922 text meh
Steve
2001 Chevrolet Corvette
The Vette gets em' Wet, it also handles nice too.
both sets look like this...one is just one inch...this is the 1 1/4 inch set.
2001 Chevrolet Corvette
The Vette gets em' Wet, it also handles nice too.
Where you located, Sean? Lol.
'94 Mustang GT
'87 Buick Regal Turbo T
who the fuck is Sean? It says Steve in the OP????
San Antonio
Pending Sale on the 1 1/4's
2001 Chevrolet Corvette
The Vette gets em' Wet, it also handles nice too.
Geeze. I was referencing your location. I have cash/paypal ready to rock both if you can tell me the brand.Originally Posted by MrMach
'94 Mustang GT
'87 Buick Regal Turbo T
Honestly, ive had them for two years, I don't have any thing on where I bought em from, or who made them, I believe I bought both from american muscle but I can't find my order info.
Sent from my SGH-T959 using Tapatalk
2001 Chevrolet Corvette
The Vette gets em' Wet, it also handles nice too.
So, how much for both sets shipped?
'94 Mustang GT
'87 Buick Regal Turbo T
well I wanted $50 a set.
So Ill do em both for 98.57 shipped. LMK and Ill PM you my paypal addy.
2001 Chevrolet Corvette
The Vette gets em' Wet, it also handles nice too.
Any takers on the 1 1/4 yet?
--Pacific Green '97 Cobra--
Eibach sportline 1.5" drop, Tokico 8 way adj struts front & QA1 10 way adj rear
Cobra R front/rear sway bars & front upper strut bar, fully adj camber plates, 42# injectors
Vortech V1 s-trim, 80mm MAF, forged piston rods & crank, MAC pro dump w/ off-road H pipe.
---------------------------------------------------------------------------
Tuned at 412hp and 343 lb ft of torque at wheels at 6psi. Best run @ 11.12
well realest has dibs on both sets, if he backs out Racer99 has dibs, if he backs out, you have dibs, and if you back out the next person to ask has dibs.
2001 Chevrolet Corvette
The Vette gets em' Wet, it also handles nice too.
Got ya, keep me posted, my SN95 is lookin' fugly with the back farther in than front ...
--Pacific Green '97 Cobra--
Eibach sportline 1.5" drop, Tokico 8 way adj struts front & QA1 10 way adj rear
Cobra R front/rear sway bars & front upper strut bar, fully adj camber plates, 42# injectors
Vortech V1 s-trim, 80mm MAF, forged piston rods & crank, MAC pro dump w/ off-road H pipe.
---------------------------------------------------------------------------
Tuned at 412hp and 343 lb ft of torque at wheels at 6psi. Best run @ 11.12
Hey Steve. You can sell to the nest in line. Unexpected expenses arose. Thanks for the help though.
'94 Mustang GT
'87 Buick Regal Turbo T
Just wanna confirm something ...
These will fit on a SN95 with no mods to it/them, right? And is it front AND rear (4 total), or just front/rear, or are they univeral.
--Pacific Green '97 Cobra--
Eibach sportline 1.5" drop, Tokico 8 way adj struts front & QA1 10 way adj rear
Cobra R front/rear sway bars & front upper strut bar, fully adj camber plates, 42# injectors
Vortech V1 s-trim, 80mm MAF, forged piston rods & crank, MAC pro dump w/ off-road H pipe.
---------------------------------------------------------------------------
Tuned at 412hp and 343 lb ft of torque at wheels at 6psi. Best run @ 11.12
I only have the 1 1/4 in the rear. Those fit with no mods.
I was running the 1 inch in the front but for those you have to knock 1/4 off the stock studs, or put in 3 inch studs and hack off studs on the spacer and use them as a normal non studded spacer.
2001 Chevrolet Corvette
The Vette gets em' Wet, it also handles nice too.
Ok, cool, just getting info before I consider.
Still waiting for sold/next in line.
--Pacific Green '97 Cobra--
Eibach sportline 1.5" drop, Tokico 8 way adj struts front & QA1 10 way adj rear
Cobra R front/rear sway bars & front upper strut bar, fully adj camber plates, 42# injectors
Vortech V1 s-trim, 80mm MAF, forged piston rods & crank, MAC pro dump w/ off-road H pipe.
---------------------------------------------------------------------------
Tuned at 412hp and 343 lb ft of torque at wheels at 6psi. Best run @ 11.12
Any news?
--Pacific Green '97 Cobra--
Eibach sportline 1.5" drop, Tokico 8 way adj struts front & QA1 10 way adj rear
Cobra R front/rear sway bars & front upper strut bar, fully adj camber plates, 42# injectors
Vortech V1 s-trim, 80mm MAF, forged piston rods & crank, MAC pro dump w/ off-road H pipe.
---------------------------------------------------------------------------
Tuned at 412hp and 343 lb ft of torque at wheels at 6psi. Best run @ 11.12
for which set, I still have both sets.
2001 Chevrolet Corvette
The Vette gets em' Wet, it also handles nice too.
Last I heard there was a line of possible sellers for both, I'm looking at the 1 1/4 though.
They all fall though?
--Pacific Green '97 Cobra--
Eibach sportline 1.5" drop, Tokico 8 way adj struts front & QA1 10 way adj rear
Cobra R front/rear sway bars & front upper strut bar, fully adj camber plates, 42# injectors
Vortech V1 s-trim, 80mm MAF, forged piston rods & crank, MAC pro dump w/ off-road H pipe.
---------------------------------------------------------------------------
Tuned at 412hp and 343 lb ft of torque at wheels at 6psi. Best run @ 11.12
Did Racer99 ever backout? Buy em?
Throw me a bone, do I need to hold on to what's left of my iPhone funds for you or move on ...
--Pacific Green '97 Cobra--
Eibach sportline 1.5" drop, Tokico 8 way adj struts front & QA1 10 way adj rear
Cobra R front/rear sway bars & front upper strut bar, fully adj camber plates, 42# injectors
Vortech V1 s-trim, 80mm MAF, forged piston rods & crank, MAC pro dump w/ off-road H pipe.
---------------------------------------------------------------------------
Tuned at 412hp and 343 lb ft of torque at wheels at 6psi. Best run @ 11.12
Steve, you still have the other set of spacers?
Wanting to put one in a lathe and make it about 3/8" of an inch.
03 DSG MACH - TT - Not fast enough
03 OW MACH - Slower than above
11 RR GT/CS - Slower than both of the above
Thanks to Longoria Race Cars
yeah man I do actually, I took em off before work so I can start working on those fuggin wheel studs.
2001 Chevrolet Corvette
The Vette gets em' Wet, it also handles nice too.
How much you want for them?
03 DSG MACH - TT - Not fast enough
03 OW MACH - Slower than above
11 RR GT/CS - Slower than both of the above
Thanks to Longoria Race Cars
IDK $30 sounds good to me.
2001 Chevrolet Corvette
The Vette gets em' Wet, it also handles nice too.
Ill pick them up from you later. I work this weekend and I never know my hours for my part time job.
03 DSG MACH - TT - Not fast enough
03 OW MACH - Slower than above
11 RR GT/CS - Slower than both of the above
Thanks to Longoria Race Cars
sounds good, Im off all weekend.
2001 Chevrolet Corvette
The Vette gets em' Wet, it also handles nice too.
i'm so confused. 1 1/4's available?
Guys....look at initial post......archie will have both sets. Thread closed.
2001 Chevrolet Corvette
The Vette gets em' Wet, it also handles nice too.
Posting Permissions
