![]() |
|
|||||||
| 5.0 Tech (79-95) Discuss the 1979-1995 5.0 Mustang |
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
#1 |
|
Registered User
Join Date: Nov 2004
Location: san antonio
Posts: 97
|
where is blinker relay?
blinkers went out and i dont know where relay is at, its a 91 gt aod :larry03gt
__________________
![]() 91 GT 5.0 "AUTOMATIK" TYPHOON INTAKE 24LB MOTORSPORT INJECTORS COBRA MASS AIR METER COLD AIR INTAKE "FENDERWELL" FORD RACING WIRES B&M SHIFT KIT MSD CAP AND ROTOR MAC SHORTY HEADERS HTS MAC PRO CHAMBER |
|
|
|
|
|
#2 |
|
Killing is my Business...And Business is Good!
![]() |
I dont think there is a relay, but I think your talking about the flasher. It looks like a round relay. It is either on the front of the fuse panel or on the back of it. On my 88 it is in the rear, but Ford moved it to the front at a certian year but I cannot remember when.
__________________
![]() 1988 Mustang LX |
|
|
|
|
|
#3 |
|
Registered User
Join Date: Nov 2004
Location: san antonio
Posts: 97
|
when u say flasher do u mean "hazard", my hazards work, but blinkers outside and in dont work, :larry03gt
__________________
![]() 91 GT 5.0 "AUTOMATIK" TYPHOON INTAKE 24LB MOTORSPORT INJECTORS COBRA MASS AIR METER COLD AIR INTAKE "FENDERWELL" FORD RACING WIRES B&M SHIFT KIT MSD CAP AND ROTOR MAC SHORTY HEADERS HTS MAC PRO CHAMBER |
|
|
|
|
|
#4 |
|
Just call me Al
Join Date: Jun 2003
Location: San Antonio
Posts: 1,332
|
I think the blinkers go to a fuse. Remove your fuse panel(if you have one) and on the back it will tell you what's for what
Last edited by blu89hb; 03-09-2005 at 11:40 AM. |
|
|
|
|
|
#5 |
|
PHL style
Join Date: Nov 2004
Location: san antonio
Posts: 5,549
|
i just looked up in my chilton what you are discribing. it says: check the fuse. replace if defective. check the flasher by substition. check for open circuit, short circuit or poor ground. about the flashers: 2 flasher units are used. 1 for turn signals, 1 for hazards. the turn signal one is mounted on the instrument panel reinforcement above the fuse panel. the hazard flasher is mounted in the fuse panel. as for the fuse for the turn signals, it is in socket #5 and should be a lt. blue 15 amp fuse. (location of socket #5 is the second row, first slot on the left - its vertical) it also controls back up lamps, fluids module, heated rear window relay. hope this helps. good luck
|
|
|
|
|
|
#6 |
|
Killing is my Business...And Business is Good!
![]() |
Yup, you have a blinker flasher and a hazard flasher. Always check fuses before doing anything else.
__________________
![]() 1988 Mustang LX |
|
|
|
|
|
#7 |
|
Registered User
Join Date: Nov 2004
Location: san antonio
Posts: 97
|
i never did find it, so i put on my hazards every lane change and turn
:larry03gt
__________________
![]() 91 GT 5.0 "AUTOMATIK" TYPHOON INTAKE 24LB MOTORSPORT INJECTORS COBRA MASS AIR METER COLD AIR INTAKE "FENDERWELL" FORD RACING WIRES B&M SHIFT KIT MSD CAP AND ROTOR MAC SHORTY HEADERS HTS MAC PRO CHAMBER |
|
|
|
|
|
#8 |
|
Registered User
Join Date: Jan 2005
Location: san antonio
Posts: 429
|
take everything out of the glove box and pull it down and to the left inside kind of behind the radio you will find it -- it was hard for me had to listen for the clink and finaly found it -- hope that helps
__________________
1993 teal metalic cobra clone-----SOLD 1993 GMC Yukon 2 door 4x4 1965 coupe being built pics will be up soon |
|
|
|
![]() |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|